Identificador: 1162
Abierta
Descripción
PARTE: 12190 – LIJADORA DE BANDA ANCHA – 3 LIJAS – 52” ANCHO – TIMESAVERS
USADA – BUENAS CONDICIONES – POCO USO
50 HP, 460/60/3, 12" diam. rubber contact drum with hold-down shoes
50 HP, 230/460/60/3 platen with hold-down shoes
40 HP, 230/460/60/3 platen with hold-down shoes
5 HP, 208-230/460/60/3 feed system motor with Poweflex VFD
Powered up/down conveyor with digital ProScale readout
75" abrasive belt length, electric eye tracking, & motor load meters
(6) 6" diameter dust outlets
9-1/2' x 7-1/2' x 8' approx. overall dimensions
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100
PARTE: 2EV-6100 - POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100220 Volt, 3 Ph., 60 Hz., or 380 Volt, 3 Ph., 50 Hz.17 kw (no air required) Standard work height 37”.Standard Features:90 and 180 degree setupQuick-change 90 and 180 degree roller assembles each side.Maximum material width 48"Heaters: Infrared radiant panel (instant on / off)Foot print: 107”L X 72”W X 44”H, Work height 37”Maximum Feed rate 10 feet per minute.Feed motor: ½ hp variable speed DC drive.Crated weight 2400 LBS. Shi...
AMXmachinery
OVER ARM ROUTER
PARTE: 2EV-2480 - OVER ARM ROUTER - EVANS 2480 - 220 Volt, 3 Phase, 10 amp- Standard Features:- 3 HP High frequency router motor- 80 PSI Required- 18,000 RPM- Working height 33"- Includes router bit Part # 08018- 30" x 48" cutting area- Crated weight 1500 LBS. Shipping dimensions 69” long X 72” wide X 65” highOptional:- 440 Volt, 3 Ph. 5 amp, 80 PSI
AMXmachinery
CEPILLO 13” DE BANCO – 2 HP, 110V, 1 FASE - 2 CUCHILLAS
PARTE: 1SL-DC-CM13-B - CEPILLO 13” DE BANCO – 2 HP, 110V, 1 FASE - 2 CUCHILLASNUEVO CON GARANTIAPotencia 2 HP, 2HP, 60HZ, 110V, 2 CUCHILLASAltura máxima 15.2 cm
Incluye conexión para el colector de polvo
AMXmachinery
MOLDURADORA 5 CABEZALES
PARTE: 2WG-UNIMAT 217 - MOLDURADORA - 5 CABEZALESMOLDURADORA AUTOMATICA5 CABEZALESCARACTERISTICAS GENERALES:KW (HP) rpm Tool cutting circle1 - 7,5 (10) with Electronic Brake 6000 5“ – 5-11/16“2 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“3 - Joint Motor together with Right 6000 5“ – 7-7/8“4 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“5 - 7.5 (10) with Electronic Brake 6000 5“ – 7-7/8“ Tool arrangement BRLTBWorking width 3/4“ – 9“Working height 5/16“...