Identificador: 250
Abierta
ID de articulo : # 250 se ha agregado a su lista de deseos.
Descripción
PARTE # 12WG-UNIMAT 217 - MOLDURADORA - 5 CABEZALES
MOLDURADORA AUTOMATICA
5 CABEZALES
CARACTERISTICAS GENERALES:
KW (HP) rpm Tool cutting circle
1 - 7,5 (10) with Electronic Brake 6000 5“ – 5-11/16“
2 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“
3 - Joint Motor together with Right 6000 5“ – 7-7/8“
4 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“
5 - 7.5 (10) with Electronic Brake 6000 5“ – 7-7/8“
Tool arrangement BRLTB
Working width 3/4“ – 9“
Working height 5/16“ – 4-3/4“
(with tool cutting circle 5”)
Feed Speed-variable with inverter 20 – 100 feet per minute
DigiSet (double mechanical readouts) for left and top radial
adjustments. One readout is for the tool size and the other for the
finished wood dimension.
Five feed roller shafts in standard
One driven steel rollers in the machine table
One driven roller in the out-feed table
Axial setting range of feed roller opposite the left tool holder 1 3/8”.
Extended feed roller shaft opposite the left tool holder 6”.
Axial setting range of vertical spindle 3 -1/8 in.
Axial setting range of horizontal spindle 1 -3/4 in.
(1st bottom 3/16 in.)
All spindles diameter 1 - 1/2"
Mechanical readouts on top spindle chip-breaker and pressure shoe.
5 Additional set of spacing collars, clamping length 6-11/16”,
diameter 1-1/2"
Operating voltage- 3 phase, 460 Volt, 60 Cycles
according to US regulations
Straightening table, 6-1/2 ft
(incl. edge jointing fence)
Machine table and fences chromium-plated (excluding infeed table and special table plates)
Electric height adjustment of the feed
Central position of lubrication points at the front side of the machine
One interior light in the safety hood
The Illustrations in this offer can include special equipment, which do
not belong to the range of your offer.
The offer is made pursuant to our General Standard Terms and Conditions.
Safety and Noise Protection:
Electromagnetic interlocking of the safety hood (the hood may be
opened only after the spindles come to a complete stop,
(which is approximately 15 seconds with the “Smart” Spindle Brakes)
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
GUILLOTINA CHAPA 2 NAVAJAS
PARTE # 3NN-CUTMATE3400D – GUILLOTINA PARA CHAPA – 2 NAVAJAS - 3400 MMPARTE # 3NN-CUTMATE2800D – GUILLOTINA PARA CHAPA – 2 NAVAJAS - 2800 MMSpecificationModelCutMate 3400DCutMate 2800DCutting Length3400 mm2800 mmDaylight Opening80 mm80 mmElectric Powerapprox. 11 kwapprox. 11 kwCutting Width30 ~ 470 mm30 ~ 470 mmDimensions of Guillotine (L x W x H)5100 x 1800 x 2000 mm4500 x 1800 x 2000 mmDimensions of Hydraulic Tank (L x W x H)1150 x 550 x 1100 mm1150 x 550 x 1100 mmNet Weight (with Hydr...
-500x500.jpg)
AMXmachinery
TANQUE SAND BLASTER 20 GALONES
PARTE: 1SIL-DC-SB20G - SAND BLASTER - TANQUE 20 GALONESPresión requerida 60-125 psi, volumen 6 a 25 CFM dependiendo de la medida de la boquilla - CAMBIARIncluye: Pistola, ajuste de presión, 4 boquillas de cerámica .10”, .125”, .150”, .175”, manguera de 9 pies (2.7 metros)Dimensiones totales: 33-1/2” x 18-3/4” x 13” - CAMBIAR
AMXmachinery
ESPIGADORA DOBLE
PARTE # 12005 – ESPIGADORA DOBLE MESA – PADE T45Limpiada y revisadaMaximum Tenon Length: 100mmMaximum Tenon Thickness: 30mmMaximum Tenon Depth: 50mmVertical Table Adjustment: 100mmTraversal Table Adjustment: 50mmTables TiltPneumatic Hold-DownsCutterhead Motor: 3 HPRevolution Motor: 1 HPMechanical Digital Readouts for Tenon AdjustmentsCurrently Wired for 460v, 3ph (Please Ask About Available Voltage Change to 230v, 3ph)
AMXmachinery
CASETA PINTURA CONTINUA PARA MOLDURAS
PARTE # 2TA-TS-12ATSP – CASETA DE PINTURA CONTINUA PARA MOLDURASNueva con garantíaFeatures:PLC control for easy operator and variability setup.Fast spraying processing for profiles strips and two edges together or four edges at panels by one pass.The spray guns are controlled by photocell sensor for auto spray time and saving the spray material.Individual painting volume adjustment control for each spray gun.Variable feed speed control for the best finish result.Two trays to collect unused pa...