ID: 223
Open
Description
PARTE # 2TA-SD-904MU – LIJADORA DE MOLDURAS – 4 CABEZALES
Nueva con garantía
Variable feeding 20" to 80" to get different setup easily.
Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.
Max. sanding thickness 4".
Min. sanding length 13".
Sanding spindle 1-1/4" dia. 2 HP.
Max sanding wheel 12" dia.
SPECIFICATIONS |
|
Wheel, Belt Head |
|
Brush Wheel Drive Motor | 2 HP |
Brush Tilts | 90° ~ 180° |
Sanding Belt | 3" x 20" |
Sanding Wheel Dia. Max | 8" |
Sanding Spindle Dia. | 1" |
Spindle Speed | 0 ~ 3600 RPM |
Profile Platen Belt Head |
|
Range of Workpiece Width | 2" ~ 70" |
Minimum Length of Workpiece | 4" |
Range of Workpiece Thickness | 1/6" ~ 4" |
Designed for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
Workpiece is through feed with power spring load pressure rolls at top, without sliding for irregular surface.
The brush, flap wheel, pneumatic drum or profile sanding head to cover all the profile sanding.
Top sanding head can be adjusted in & out, up & down.
Side sanding head can be adjusted tilt, forward & backward and up & down.
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery
MANGUERAS PARA COLECTORES DE ASERRIN
MANGUERAS PARA COLECTORES DE ASERRINNuevas con
garantíaCOLOR CRISTAL EN PVCPARTE: 1SIL-DC-DUCT2
- MANGUERA 2" DIAMETRO - 10 MTSPARTE: 1SIL-DC-DUCT3
- MANGUERA 3" DIAMETRO - 10 MTSPARTE: 1SIL-DC-DUCT4
- MANGUERA 4" DIAMETRO - 10 MTSPARTE: 1SIL-DC-DUCT5
- MANGUERA 5" DIAMETRO - 10 MTSPARTE: 1SIL-DC-DUCT6
- MANGUERA 6" DIAMETRO - 10 MTS
AMXmachinery
ENCHAPADORA DE CANTOS – 220V, 2 FASES
PARTE: 2MK-CBC.T – ENCHAPADORA DE
CANTOS – 220V, 2 FASES
Nueva con garantíaFRONT/REAR TRIMMINGTOP/BOTTOM TRIMMING
BUFFING UNIT
This
machine is a master piece of engineering, packet with features that will make
your job easier giving you a product finish like never before. Super steady and
stable the CBC.T platform is a stainless steel mono-block base. All operating
units are easy to be accessed through the upper protection hood.
The
friction-free worktable feed panels ...
AMXmachinery
REFACCIONES PLANTAS ELECRICAS POWEREN
REFACCIONES PLANTAS ELECRICAS POWEREN- AVR- ROTOR- ESTATOR- PORTA CARBONES- BATERIAS- MARCHAS- TANQUES- SOPORTES- PISTONES- ANILLOS- BIELAS- VALVULAS- RETRACTIL- KIT DE AFINACION- FILTRO DE AIRE- CARBURADOR
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 93 LITROS
PARTE:
2PG-TNF823 – HORNO PARA CERAMICA, VIDRIO, METALES – 93 LITROSNUEVO CON GARANTIAThe digital automatic TnF-82 kiln is large enough for most ceramic projects. Figured at cost per cubic foot, it is among our lowest priced hobby kilns. It uses the same circuit size as most of our studio kilns. Upgrade to a larger kiln later without having to install a new circuit.Features the easy-access drop down switch box. Remove two screws, and the box, hinged at the bottom, opens forward for easy mai...