Identificador: 223
Abierta
Descripción
PARTE # 2TA-SD-904MU – LIJADORA DE MOLDURAS – 4 CABEZALES
Nueva con garantía
Variable feeding 20" to 80" to get different setup easily.
Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.
Max. sanding thickness 4".
Min. sanding length 13".
Sanding spindle 1-1/4" dia. 2 HP.
Max sanding wheel 12" dia.
SPECIFICATIONS |
|
Wheel, Belt Head |
|
Brush Wheel Drive Motor | 2 HP |
Brush Tilts | 90° ~ 180° |
Sanding Belt | 3" x 20" |
Sanding Wheel Dia. Max | 8" |
Sanding Spindle Dia. | 1" |
Spindle Speed | 0 ~ 3600 RPM |
Profile Platen Belt Head |
|
Range of Workpiece Width | 2" ~ 70" |
Minimum Length of Workpiece | 4" |
Range of Workpiece Thickness | 1/6" ~ 4" |
Designed for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
Workpiece is through feed with power spring load pressure rolls at top, without sliding for irregular surface.
The brush, flap wheel, pneumatic drum or profile sanding head to cover all the profile sanding.
Top sanding head can be adjusted in & out, up & down.
Side sanding head can be adjusted tilt, forward & backward and up & down.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
MOLDURADORA 5 CABEZALES
PARTE # 11907 – MOLDURADORA - WEINIG PROFIMAT – 5 CABEZALESCapacity: 9" x 5"Adjustable infeed table and fence 78''1-1/2'' diameter spindlesHead Configuration: Bottom: 15 HP; Right/Left: 15 HP; Top: 15 HP; Bottom: 15 HPSpindle Speed is 6,000 RPMFeed motor: 3HPFeed Speeds infinitely variable 18-72 FPMMotors are 3PH 230/460VYear Manufactured: 1999
AMXmachinery
PARTE: 1SL-DC-SC2F8RD - PLUMA HIDRAULICA - 2 TON - PLEGABLE
PARTE: 1SL-DC-SC2F8RD - PLUMA HIDRAULICA - 2 TON - PLEGABLECAPACIDAD MAXIMA: 2 TONELADASCAPACIDAD DE ALZADO:EN POSICION 1: 2 TONSEN POSICION 2: 1-1/2 TONSEN POSICION 3: 1 TONEN POSICION 4: 1/2 TONLARGO TOTAL: 1100 MMANCHO ENTRE LAS PATAS: 945 MM
AMXmachinery
PARTE: 12651 - CEPILLO - 4 CARAS - 18” ANCHO - PINHEIRO
PARTE:
12651 - CEPILLO - 4 CARAS - 18” ANCHO -
PINHEIRO
Usado – Muy buenas condicionesCapacity: 6" x 18"Bottom Head Motor: 12 HPTop Head Motor: 18 HPSide-Head Motor: 9 HP EachFeed Motor: 3 HPFeed Rate: 30 & 60 FPMSide Head Spindle Diameters: 40mm
*Specifications are from manufacturer literature and need to be
confirmed*
AMXmachinery
PARTE: 1NE-SPO-001 - SIERRA PENDULO – MOTOR 5 HP, 220V, 3 FASES - DISCO CORTADOR 16"
PARTE: 1NE-SPO-001 - SIERRA PENDULO
– MOTOR 5 HP, 220V, 3 FASES - DISCO CORTADOR 16"NUEVA CON GARANTIADISCO 16" DIAMETROMOTOR 5 HP, 220V, 3 FASES, 3,500 RPM2 MESAS DE TRABAJO LATERALES DE 120 CM DE LARGO C/UNUEVAS MESAS LATERALES CON RODILLOSMEDIDA ENVIO PENDULO: 60 CM ANCHO X 110 CM LARGO X 220 CM ALTO - 200 KGMEDIDA ENVIO CADA MESA RODILLOS: 60 CM ANCHO X 120 CM LARGO X 100 CM ALTO - 80 KGOPCIONAL:- LARGO DE LAS MESAS MEDIDA ESPECIAL