ID: 1919
Open
Description
PARTE: 2LI-D - MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER D
Nuevo con garantía
Measuring | 5-60% dependent upon species setting* |
Display | 0.1% resolution for the entire range. |
Species | 71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100) |
Gypsum | N/A |
Reference | 0-99 for non-wood building materials |
Calibration | Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. |
Calibration Check | External calibration check block #TS is available to verify the calibration and functions of meter. |
Included | Pouch, one 9V battery, manual and laminated wood group chart. |
Size | Pocket-size 2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″ |
Weight | 8 ounces (200g), made out of high-impact plastic |
Warranty | All moisture meters have a 2 year warranty. Pins and battery are excluded. |
The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.
The entire measuring pad has to be on a flat and smooth surface for accurate readings
*Species Corrections for Ligno-Scanners and Ligno-VersaTec correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm 3 )set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings.
The Ligno-Scanners SDM and the Ligno-VersaTec have calibrations built-in for drywall and concrete and a reference scale for non-wood building materials.
Measuring range: 5-60% dependent upon Species. For hardwoods the Scanners read lower than 5%, for softwoods the Scanners start reading above 5%. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%.
Wood temperature correction is not necessary.
1 9-V Battery for 3000 Readings, Battery included
Size: 1/2″H x 2″L x 5″W (for Scanner LD width is 2 7/8″) Weight: 8 ozs
Comes in a Carry Pouch with Belt Loop.
Payments & Returns
- Payment Methods
- PayPal
Postage & Shipping
- Item Location
- 31627, Chihuahua, Mexico
- Ships To
- Mexico
- Pick-ups
- No pick-ups
- Returns Accepted
- No
Post Message
Sign in to ask the seller a question.
AMXmachinery
SIERRA ESCUADRADORA - 1600 MM – MOTOR 4 HP
PARTE: 1SL-DC-SE1600 - SIERRA ESCUADRADORA - 1600 MM – MOTOR 4 HP
Nueva con garantíaFácil Deslizamiento perillas de ajuste inclinación y altura
del discoCapacidad Max. de Corte 30,4 cm 1 “Conexión para Motor TrifásicoSierra circular 12”Motor 4 HP, 220V, 1 o 3 fasesVelocidad principal: 4,500 rpmVelocidad incisor: 8,500 rpmDiametro disco: 315 mm – 12”Diámetro disco incisor: 9 cmCapacidad de corte 90 grados: 10 cmCaapcidad de corte 45 grados: 8 cmMesa de trabajo: 38.5 x 80 cmMe...
AMXmachinery
REASERRADORA 4 CABEZALES
PARTE # 11633 - REASERRADORA 4 CABEZALES - MOTORES 40 HP - FASTLINEEN BUENAS CONDICIONES DE OPERACIONMAQUINA DE USO RUDO INDUSTRIAL CONTINUOMOTORES 40 HP, 480V, 3 FASES C/UDIAMETRO DE CABEZALES 41"GUIAS TIPO DEDUSTER PNEUMATICRUEADAS DE 1-1/2" DE ANCHO PARA USAR SIERRA CINTAS DE 2"ALIMENTADOR HIDRAULICOOPCIONALES:REGRESADOR
AMXmachinery
LIJADORA DE CEPILLO TAMBOR NEUMATICO
PARTE: 2SR-DB-612DLX - LIJADORA DE CEPILLO Y TAMBOR NEUMATICOTambor neumatico disponible en 5 diametros, de 2” to 8”.El cepillo lija partes irregulares sin perder la forma o detalleMaquina standard: Equipada con tambor neumatico de 6” diametro x 7” ancho y cabezal de cepillo con 12 cepillos individuales y motor 3/4 HP2 llaves requeridas (no incluidas)Tambien disponible en cualquier combinacion de cabezasHecha en Estados Unidos, con estandares EstadounidensesMotor de uso rudo de ¾ HP, 1...
AMXmachinery
JUEGO DE 2 ARMADORAS PARA SILLAS
PARTE: 12348 - JUEGO DE 2
ARMADORAS PARA SILLAS
USADA – BUENAS
CONDICIONESLas 2 maquinas estan disenadas para trabajar en conjunto- Una para ensamblar la parte frontal de la silla- La otra para ensamblar la parte trasera y finalmente armar toda la silla