Identificador: 1919
Abierta
ID de articulo : # 1919 se ha agregado a su lista de deseos.
Descripción
PARTE: 2LI-D - MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER D
Nuevo con garantía
Measuring | 5-60% dependent upon species setting* |
Display | 0.1% resolution for the entire range. |
Species | 71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100) |
Gypsum | N/A |
Reference | 0-99 for non-wood building materials |
Calibration | Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. |
Calibration Check | External calibration check block #TS is available to verify the calibration and functions of meter. |
Included | Pouch, one 9V battery, manual and laminated wood group chart. |
Size | Pocket-size 2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″ |
Weight | 8 ounces (200g), made out of high-impact plastic |
Warranty | All moisture meters have a 2 year warranty. Pins and battery are excluded. |
The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.
The entire measuring pad has to be on a flat and smooth surface for accurate readings
*Species Corrections for Ligno-Scanners and Ligno-VersaTec correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm 3 )set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings.
The Ligno-Scanners SDM and the Ligno-VersaTec have calibrations built-in for drywall and concrete and a reference scale for non-wood building materials.
Measuring range: 5-60% dependent upon Species. For hardwoods the Scanners read lower than 5%, for softwoods the Scanners start reading above 5%. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%.
Wood temperature correction is not necessary.
1 9-V Battery for 3000 Readings, Battery included
Size: 1/2″H x 2″L x 5″W (for Scanner LD width is 2 7/8″) Weight: 8 ozs
Comes in a Carry Pouch with Belt Loop.
Pago y Devoluciones
- Forma de pago
- PayPal
Envio
- Ubicación de elemento de riesgo
- 31627, Chihuahua, México
- Enviar a
- México
- Retiros
- no recoger
- Devoluciones aceptadas
- No
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
REASERRADORA - 6 BANDAS - BREWCO
PARTE:
12399 - REASERRADORA - 6 BANDAS - BREWCO
Usada - Buenas CondicionesIncluye banda de regreso
AMXmachinery
LAMINADORA 62" RODILLOS SEGMENTADOS
PARTE # 2EV-0207 – PINCH ROLLER 62” - RODILLOS SEGMENTADOS – EVANS 020762" capacitySegmented bottom roller for countertop operationSafety Gates on In-Feed and Out-FeedSolid Top RollerSplit Bottom RollerFeed Rate: 50 FPMMaximum Width: 62”Maximum Thickness: 2”Work Height: 30-1/2”(Optional Riser Available)Drive Motor: ½ HPElectrical: 120 V, 1 PH, 60 HzAir Requirement: 100 PSIShipping dimensions 85” long X 33” wide X 57” high*Note: Options Listed under 0257 Pinch RollerOptions:- ...
AMXmachinery
CORTADORA PAPEL - USO RUDO 12"
PARTE: 22MM-MY7000E – CORTADORA DE PAPEL - USO RUDO - 12” ANCHO - 200 HOJASNueva con garantíaCorta hasta 200 hojas a la vezMax Cut Width: 12"Sheet Capacity: 200Guide Types: InchesBase: WoodClamp: ManualBlade Mechanism for Cutting: ManualMaterial Cut Ability: Cardstock, Construction Paper, PaperManufactured In: USADimensions: 20" X 30" X 16"Warranty: 1 Year against defectsCondition: NewWeight: 45 KGThe 7000E Manual Stack Paper Cutter is a 12'' commercial quality tabletop cutter that's perfec...
AMXmachinery
CEPILLO 2 CARAS 14", 16", 20", 24"
PARTE # 1N-CP2-016 - CEPILLO 2 CARAS - 16" ANCHO - MOTOR 5 HPPARTE # 1N-CP2-020 - CEPILLO 2 CARAS - 20” ANCHO - MOTOR 7.5 HPPARTE # 1N-CP2-024 - CEPILLO 2 CARAS - 24” ANCHO - MOTOR 10 HPPARTE # 1N-CP2-029 - CEPILLO 2 CARAS - 29" ANCHO - MOTOR 15 HPNUEVOS CON GARANTIACEPILLOS PARA USO PESADO INDUSTRIALCARACTERISTICASCEPILLO 14”CEPILLO 16”CEPILLO 20”CEPILLO 24”CAPACIDAD ANCHO14”16”20”24”CAPACIDAD ALTURA6”6”6”6”MOTORES PRINCIPALES (2)5 HP5 HP7.5 HP10 HPMOTOR ALIMENTADOR1...