Identificador: 1919
Abierta
Descripción
PARTE: 2LI-D - MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER D
Nuevo con garantía
Measuring | 5-60% dependent upon species setting* |
Display | 0.1% resolution for the entire range. |
Species | 71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100) |
Gypsum | N/A |
Reference | 0-99 for non-wood building materials |
Calibration | Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. |
Calibration Check | External calibration check block #TS is available to verify the calibration and functions of meter. |
Included | Pouch, one 9V battery, manual and laminated wood group chart. |
Size | Pocket-size 2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″ |
Weight | 8 ounces (200g), made out of high-impact plastic |
Warranty | All moisture meters have a 2 year warranty. Pins and battery are excluded. |
The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.
The entire measuring pad has to be on a flat and smooth surface for accurate readings
*Species Corrections for Ligno-Scanners and Ligno-VersaTec correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm 3 )set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings.
The Ligno-Scanners SDM and the Ligno-VersaTec have calibrations built-in for drywall and concrete and a reference scale for non-wood building materials.
Measuring range: 5-60% dependent upon Species. For hardwoods the Scanners read lower than 5%, for softwoods the Scanners start reading above 5%. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%.
Wood temperature correction is not necessary.
1 9-V Battery for 3000 Readings, Battery included
Size: 1/2″H x 2″L x 5″W (for Scanner LD width is 2 7/8″) Weight: 8 ozs
Comes in a Carry Pouch with Belt Loop.
Pago y Devoluciones
- Forma de pago
- PayPal
Envio
- Ubicación de elemento de riesgo
- 31627, Chihuahua, México
- Enviar a
- México
- Retiros
- no recoger
- Devoluciones aceptadas
- No
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
SOLDADORA DE SIERRA CINTAS
PARTE: 4VF-VC6 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 20 – 60 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm
AMXmachinery
ESPIGADORA DOBLE DE CADENA - SCMI
PARTE: 12413 – ESPIGADORA DOBLE DE CADENA - SCMI
USADA - BUENAS CONDICIONESSCMI Concept 2000 •
Opening Capacity: ~4'•
Two-Post Machine• First
Station: Left & Right Trim Saws• Trim
Saw Motors: 8 HP Each• Second
Station: Left & Right Jump-CopeUnits,
7000 RPM• Jump
Cope Motors: 11.5 HP Each• Third
Station: Left & Right Cope Units, 7000RPM• Cope
Motors: 11.5 HP Each• Load
Space: 32"• Rubber
Padded Feed Chains 2.75" Wide• Pop-Up
Dogs on 14-3/4" Centers•
Push-...
AMXmachinery
PARTE: 12305 - CABEZALES PARA MOLDURADORA - LARGO 6” - FLECHA 1-13/16" - FLECHA 2-1/8"
PARTE: 12305 -
CABEZALES PARA MOLDURADORA - LARGO 6” - FLECHA 1-13/16" - FLECHA 2-1/8"SIN BUJE FLECHA 2-1/8"
USADOS - MUY BUENAS CONDICIONES
North American
Gladu hydro-lock
6 alas
20 grados
Diámetro interior - Flecha: 1-13/16"
Diámetro exterior: 6” (150 mm)
Largo
6” (152 mm)
AMXmachinery
TRISCADORA 10-45 MM
PART # 4VF-SV45MN - TRISCADORA PARA SIERRA CINTAS 10 -45 MMNueva con garantiaPossibility to choose the setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree; self centring clamps. Workbench model.Bandsaw Thickness [min-max]: 0,5 – 1,00 mmBandsaw Width [min-max]: 10 – 45 mmSetting Pitch [min-max]: 5 – 25 mmTwo types of setting: Net – Gross Weight: 3,8 – 4,5 kgMachine Dimensions [D x W x H]: 35 x...