ID: 265
Open
Description
PARTE: 2LI-D - MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER D
Nuevo con garantía
Measuring | 5-60% dependent upon species setting* |
Display | 0.1% resolution for the entire range. |
Species | 71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100) |
Gypsum | N/A |
Reference | 0-99 for non-wood building materials |
Calibration | Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. |
Calibration Check | External calibration check block #TS is available to verify the calibration and functions of meter. |
Included | Pouch, one 9V battery, manual and laminated wood group chart. |
Size | Pocket-size 2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″ |
Weight | 8 ounces (200g), made out of high-impact plastic |
Warranty | All moisture meters have a 2 year warranty. Pins and battery are excluded. |
The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.
The entire measuring pad has to be on a flat and smooth surface for accurate readings
*Species Corrections for Ligno-Scanners and Ligno-VersaTec correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm 3 )set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings.
The Ligno-Scanners SDM and the Ligno-VersaTec have calibrations built-in for drywall and concrete and a reference scale for non-wood building materials.
Measuring range: 5-60% dependent upon Species. For hardwoods the Scanners read lower than 5%, for softwoods the Scanners start reading above 5%. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%.
Wood temperature correction is not necessary.
1 9-V Battery for 3000 Readings, Battery included
Size: 1/2″H x 2″L x 5″W (for Scanner LD width is 2 7/8″) Weight: 8 ozs
Comes in a Carry Pouch with Belt Loop.
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
SIERRA TRONZADORA DE 45 A 90 GRADOS AJUSTABLE – DISCO 20”
PARTE:
2TA-CS- 20RL45 – SIERRA TRONZADORA DE 45 A 90 GRADOS AJUSTABLE – DISCO 20”
NUEVA
CON GARANTIA
Features:
Adjustable
maximum 45 degree to the right or left or 90 degree angle setting for
semi-automatic, fast cutting.
Semi-automatic
by pneumatic movement cutting.
Auto.
cutting cycle simply operated by foot switch.
Sealed
long-life ball bearings.
Full 10
HP motor for powerful cutting capacity.
Precision
ground cast iron table with heavy metal cabinet st...
AMXmachinery
SIERRA CINTA 16"
PARTE # SIL-DC-BS0016 - SIERRA CINTA DE 16" - MOTOR 2 HPNUEVA CON GARANTIAMOTOR: 2 HP, 220V, 60 Hz, 2 FASESCAPACIDAD DE CORTE: 14.4" X 8"LONGITUD DE LA SIERRA: 2950 MMANCHO DE LA SIERRA CINTA: DESDE 1/4" HASTA 1-1/2"VELOCIDAD DE LA CINTA: 10 MTS/SEGTAMANO DE LA MESA: 20" X 15-1/2"ALTURA DE LA MESA: 38"INCLINACION DE LA MESA: 10 - 45 GRADOSPESO: 126 KGSEMPAQUE: 1 CAJA
AMXmachinery
BOLSAS PARA COLECTORES TAMANOS ESPECIALES
BOLSAS PARA COLECTORES DE ASERRIN - TAMANOS ESPECIALESEnvienos las medidas, fotos y caracteristicas de las bolsas que necesita y cotizamos.
AMXmachinery
PARTE: 2MT-CM15 – CORTA Y AGUJERA ESQUINAS – PARA LAMINA RECONOCIMIENTOS
PARTE: 2MT-CM15 – CORTA Y AGUJERA ESQUINAS – PARA LAMINA RECONOCIMIENTOSNueva con garantia6 combinaciones:Esquina NotchEsquina RedondaAgujeros EsquinasAgujeros CentradosCombinacion agujero y notchCombinacion agujero y redonda Peso: 4 kgDimensiones: 17.25 × 11.25 × 6 pulgadasDiámetro agujero: 1/8 y 3/32 El trabajo se hace en 1 solo pasoCortes rapidos, limpios y sin rebabasRadio adjustableRapida y facil de usarPrecision en cortes repetitivos