ID: 246
Open
Description
PARTE # 32A-M410 - MOLDURADORA 4 CABEZALES - ANCHO 10" - 3 FASES
PARTE # 32A-M410S - MOLDURADORA 4 CABEZALES - ANCHO 10" - 2 FASES
PARTE # 32A-M412 - MOLDURADORA 4 CABEZALES - ANCHO 12" - 3 FASES
NUEVAS CON GARANTIA
CARACTERISTICAS | M-410 | M-410S | M-412 |
ANCHO MAXIMO TRABAJO | 10” | 10” | 12” |
LARGO MINIMO MATERIAL | 10” | 10” | 10” |
VOLTAGE | 3 FASES | 2 FASES | 3 FASES |
MOTOR SUPERIOR | 4 HP | 3 HP | 7.5 HP |
MOTOR INFERIOR | 4 HP | 3 HP | 5 HP |
MOTOR LADOS (2) | 4 HP | 3 HP | 4 HP |
CABEZALES LATERALES 30 MM – ESTILO EUROPEO | SI | SI | SI |
CAP. CORTE CABEZAL SUPERIOR | CEPILLADO: 5/16” MOLDURADO 3/8” | CEPILLADO: 5/16” MOLDURADO 3/8” | CEPILLADO: 5/16” MOLDURADO 3/4” |
CUCHILLAS PLANAS INCLUIDAS CABEZAL SUP E INF. (2 EN CADA CABEZAL) | SI | SI | SI |
DEPOSITO ACEITE PARA LUBRICAR MESA | SI | SI | SI |
MECANISMO DIGITAL MESA | NO | NO | SI |
DIMENSIONES DE ENVIO | 136X115X115 CM | 136X115X115 CM | 145X115X115 CM |
PESO | NETO: 680 KG ENVIO: 750 KG | NETO: 680 KG ENVIO: 750 KG | NETO: 680 KG ENVIO: 750 KG |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 2TA-PT-48HF – PRENSA DE TABLEROS - ALTA FRECUENCIA – ALTA PRODUCCION – CAPACIDAD 49” X 98”
PARTE: 2TA-PT-48HF – PRENSA DE TABLEROS - ALTA FRECUENCIA – ALTA PRODUCCION – CAPACIDAD 49” X 98”New with warrantyMass production for wooden board, 2 to 3 minute for drying a 4' x 8' wooden boardAutomatic infeed, out-feed cycle, mass production within 3 - 5 minutes is ready for output.Shortens manufacturing procedures – no need to pass through for the dovetailing or joining process.Equipped with a massive upper plate supplies powerful hydraulic pressure, which presses each part of wo...
AMXmachinery
GUILLOTINA PA5A CHAPA - CASATI MACCHINE TSO TSI
PARTE: 12157 - GUILLOTINA PA5A CHAPA - CASATI MACCHINE TSO TSIUSADA – MUY BUENAS CONDICIONESCombined length- and crosscut veneer guillotineYear of manufacture 1980Cutting length mm 4.200Length of cross-cut mm 600Strip width max mm 700Cutting height mm 60Strip width min mm 25Digital readout YesSafety device YesCross cutting device YesCross-cut guillotine YesPressure beam hydraulicBlade drive hydraulicAvailability short-term, ex location customer!Operating status dismantled/ stored
AMXmachinery
LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96”
PARTE:
2DO-PMC-264-1 –
LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP -
MESA 30”X 96”
Nueva con garantíaMaximum Part Length:Pressure Pad Traveling Bar: 96"Pressure Pad
Traveling Bar Contact Wheel Assembly: 80" Table
size: 30" wide X 96" long Steel
table covered with ¾" x 6" pine boardsTable
weight capacity: 200 lbOne
Abrasive Belt: 6" X 264", 4750 F.P.M.Pulleys:
10" dia. X 6.252 facePressure
Pad Traveling BarHand
Held Pressure DeviceVertical
adjustment: 28"...
AMXmachinery
TORNO COPIADOR – NAVAJA TRASERA – LOBO
PARTE # 11623 – TORNO COPIADOR – NAVAJA TRASERA – LOBO En buenas condiciones de opracionProduccion 4-7 piezas por minutoMotor 7.5 HP, 220/440V, 3 fases, 60 cyLOBO CP-168A Hydraulic Copy Lathe with hopper feed with automatic chucking, square or round stock can be hopper feed.This unit is designed to produce (4 - 7) pieces a minute.Equipped with 7.5 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change and 3 HP hydraulic motor.Features:Designed for the fast, effici...