ID: 1587
Open
Description
PARTE: 12340 - COMPRESOR DE TORNILLO - 30 HP
USADO - MUY BUENAS CONDICIONES
CoAire CHSA-30
230/440V, 60 Cy, 3 Phase
Main Motor: 30 HP
Discharge Pressure: 150 PSI
Air Delivery: 100 CFM
Compressor Speed: 3050 RPM
Ambient Temperature: 32 Deg. - 115 Def. F
Driving Method: V-Belt (3VX4)
Oil Sump Capacity: 5 Gallons
Dimensions: 55-1/2" L x 40-3/8" W x 48-1/2" H
Weight: 1232
Filters have been replaced, its been flushed out and has new oil.
The last hours recorded on the inside panel are 35,147, they may have gone up since it was serviced last
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
TALADRO MULTIPLE DOBLE
PARTE # 2TA-BR-2142B - TALADRO MULTIPLE DOBLEThe machine is standard designed and constructed for Horizontal and Vertical boring units.Each 21 horrizontal and 42 vertical drills, drill head can be adjust to any degree position for X or Y axis combination construction drill.The machine is easy to operate. Simply press the foot switch and entire horizontal and vertical boring operations can be accomplished quickly.Vertical boring for drilling at longitudinal and cross directionThe vertical boring...
AMXmachinery
ARMADORA DE SILLAS - LANCASTER
PARTE: 12384 - ARMADORA
DE SILLAS - LANCASTER
USADA – BUENAS
CONDICIONESMax opening between jaws (front/back) 32"Max opening between jaws (side/side) 26"Max opening between clamping jaws on side clamp assembly
24"(2) horizontal adjustable swivel side clampsPneumatic clamping cylinders with 5" stroke(1) horizontal adjustable side to side clamp Pneumatic
clamping cylinder with 5" strokeManual traverse of end clamping jaws Bottom chair leg support
table
Foot ped...
-500x500.jpg)
AMXmachinery
BANDA PARA CEPILLO 12.5"
PARTE: 1SL-R-CM12.5B-A26 - BANDA PARA CEPILLO 12.5" BANDA PARA CEPILLO 12.5 PULGADAS SILVERLINE2 PIEZAS INCLUIDA EN EL PRECIO
AMXmachinery
PRENSA - GRABADORA DE MOLDURAS – DIFERENTS DISENOS – 2 MAQUINAS
PARTE: 12243 – PRENSA - GRABADORA
DE MOLDURAS – DIFERENTS DISENOS – 2 MAQUINAS
USADA – BUENAS CONDICIONES
Mfg
1981
Electric 230 volt, 60 cycle, 3 phase
Press
width 450mm (17.71")
Material
max width 500mm (19.68")
Material
Speed 200-1000 Meters per hr. (650 -
3200 ft)
Engraving
depth 3mm
Dual
propane torch heaters
Includes
Wheels as shown (100 - 250 mm diameter wheels)
Shipping
Footprint: 6 (length) x 6 (width) x 5 (height)
Weight: 25...