Identificador: 2080
Abierta
Descripción
PARTE: 12441 - COLECTOR DE ASERRIN - MOTOR 7.5 HP
USADO - MUY BUENAS CONDICIONES
MOTOR 7.5 HP, 220V, 3 FASES - 3450 RPM
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PLANTA DE LUZ 25,000 WATTS
PARTE: 1PW-25000 - PLANTA DE LUZ 25,000 WATTSMODELOPW-25000FASESTRIFASICAARRANQUEELECTRICOCAPACIDAD MAXIMA25000 WATTSCAPACIDAD NORMAL20000 WATTSVOLTAJE120/240 VOLTSAMPERAJE165 AMPMOTOR34 HP/3600 RPMNIVEL DE RUIDO60 DB @ 7 MTSTANQUE30 LTSFUNCIONAMIENTO AL 50% DE CARGA13 HRSPESO190 KGSCONTIENE KIT DE ARRASTREGENERADOR KOHLER
AMXmachinery
PARTE: AMX-10156 - EXTRACTOR DE TURBINA - 3 HP
PARTE: AMX-10156 - EXTRACTOR DE TURBINA - 3 HP
USADO - MUY BUENAS CONDICIONES
MOTOR: 3 HP (2.2 KW), 220/460V, 3
FASES
ENTRADA REDONDA: 10”
SALIDA RECTANGULAR: 4” X 6”
MEDIDAS TOTALES: 22” ANCHO X 17”
FONDO X 25” ALTO
AMXmachinery
SIERRA VERTICAL ELCON - SERIES EDGE
PARTE: 4EL-M125400 – SIERRA VERTICAL – 1250 X 3300 MM - ELCON 125 EDGEPARTE: 4EL-M155400 – SIERRA VERTICAL – 1550 X 3300 MM - ELCON 155 EDGEPARTE: 4EL-M185400 – SIERRA VERTICAL – 1850 X 3300 MM - ELCON 185 EDGEPARTE: 4EL-M220400 – SIERRA VERTICAL – 2200 X 4300 MM - ELCON 220 EDGE The New EDGE.Trendy and eye catching design and well equipped.Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigi...
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...