Identificador: 330
Abierta
Descripción
PARTE # 2DO-CONCEPT-2600 - SIERRA DE PANELES AUTOMATICA
An Innovative and Surprisingly Affordable Beam / Panel Saw ... 100% Made in Italy
As compared to a Sliding Table Saw or Vertical Panel Saw, Concept 350 is more accurate, is easier to operate, is much safer, and can be up to 3x more productive !
Allows the small to mid-sized shop to advance with capacity and accuracy previously only available to larger operations with much larger machinery budgets.
Occupies about the same footprint as a sliding table saw but doesn't require valuable floor space in front or behind like a sliding table saw does.
Side-by-side comparison proved Concept 350 can be up to 3x more productive than a slider.
Extremely easy to use ... and there is no complicated programming to learn.
Sizes panels accurately and chip free with a very unique single blade scoring function.
Bevel cutting of 0-46 degrees is possible with the standard electronically controlled blade tilt.
The large diameter blade in conjunction with the massive pressure beam allows the operator the ability to safely stack or book cut multiple panels.
The 300 - 350 mm blade is completely enclosed during the entire cutting cycle thus insuring operator safety.
Video de la maquina funcionando: VIDEO 1
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIQUIDO ANTI-ADHERENTE - PARA PEGAMENTO BLANCO
PARTE: 2AC-5001
- LIQUIDO ANTI-ADHERENTE - PARA PEGAMENTO BLANCO
CUBETA 20 KGEvita se pegue
el pegamento a la maquinaria,
Facilita
retirar el pegamento de las máquinas,
Rapidez para
limpiar maquinas,
Para
mantenerlas limpias, seguras y productivas
Maquinas:
Prensas y Pegadoras
de tableros de madera Taylor
Finger Joints
para hacer molduras de madera
Enchapadoras de
cantos
AMXmachinery
TALADRO MULTIPLE 21
PARTE # 1VT-ALFA21CLASSIC - TALADRO MULTIPLE 21 BROCASNUEVO CON GARANTIACantidad de mandriles: 21Peso neto aproximado: 264 KgDistancia entre centro de mandriles: 32 mmDistancia entre el primer y último mandril: 640 mmProfundidad máxima de taladrado: 75 mmDimensiones de la mesa: 860 x 500 mmDimensiones máximas de la pieza: 800x3000 mmVelocidad de los mandriles: 2800 r.p.mFuerza del motor: 2.5 H.P.Presion de aire requrida: 6.8
AMXmachinery
BOMBA DE VACIO - 7.5 HP
PARTE: 2TA-VC-DR07 – BOMBA DE VACIO – 7.5 HP - DRY ROTARY VANE(VC-DR07) Dry Rotary Vane Type Vacuum PumpSingle stage rotary vane vacuum pump are directly connected the outer covers of aluminum alloy pump with the electrical motor, for efficient and heat dissipation.The pump are advanced in stable functioning and low noise for acquiring High vacuum pressure, high water vapor toleranceDry operation for oil-less and direct drive with no belts or gears to ensure low energy consumption usageCompa...
AMXmachinery
PARTE: 12472 - BRIQUETEADORA PARA MADERA - 20 HP - COSTA
PARTE: 12472 - BRIQUETEADORA PARA MADERA - 20 HP - COSTA
- 2 máquinas en existencia
Usada - Muy buenas condiciones
Máquina
Briqueteadora:
A. COSTA. Mod. Bricmatic 1/50/130 De fabricación italiana.Sistema: Automático con volante de
acero y sistema de presión de cámara y pistón.Requerimientos para mezcla de materia
prima: No
requiere que se agregue ningún tipo de aglutinante extra para formar las
briquetas.Tipos de materia prima: Aserrín, viruta y/o mezcla
de ellos de madera...