Identificador: 2083
Abierta
Descripción
PARTE: 12444 - MOLDURADORA - 5 CABEZALES - WEINIG U23E
USADA - BUENAS CONDICIONES - AS IS
Capacity: 9" x5"
Spindle Diameters: 1-13/16"
Spindle Configuration: Bottom - 10 HP, Right/Left - 20 HP, Top - 20 HP, Bottom - 15 HP
Feed Motor: 5 HP
Variable Speed Feed
78" Infeed Table
Sound/Safety Enclosure
460v, 3ph
Year: 2001
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA CINTA - VOLANTES 14” - ½ HP - DELTA
PARTE: AMX-10151 - SIERRA CINTA - VOLANTES 14” - ½ HP - DELTA
USADA - MUY BUENAS
CONDICIONES
Gomas de los volantes
nuevos
Todos los
baleros nuevosMotor 1/2 HP, 110V, 1 FaseVolantes 14" diametroAltura maxima de corte: 18 cm (7")Medidas totales: 33" ancho x 17" fondo x 66" alto
AMXmachinery
ASTILLADOR DIESEL 22 HP
PARTE: 2EB-WP-22HP-D-SDS – ASTILLADOR DIESEL – 22 HP – MAX DIAMETRO 8”NUEVA CON GARANTIAPower: 22 HPEngine Make: Changchai 22HP Single Cylinder Diesel Engine w/ Electric Start Battery includedChipping Capacity: 8" DiameterFeeding System: Hydraulic Feed (Forward / Neutral / Reverse)Rotor Plate Size: 640mm (25.2")Rotor Plate Weight: 180 LbsBlade System: 1 Fixed Anvil Blade 2 Moving BladesOverall size: 136" L x 82" H x 60" WCrate Box Dimensions: 67" x 44" x 44"Feed Opening Size: 7.875" ...
AMXmachinery
SIERRA ESCUADRADORA 1600 MM
PARTE # 2TA-TS-P1600MA - SIERRA ESCUADRADORA - 1600 MMHeavy duty construction provides vibration free operation. Easy to set up and adjust.Manual raise, lower and tilt of main blade and scoring saw.Scoring unit provides clean, accurate, chip free cutting, ready for edge banding.Sealed main shaft bearings (lubricated for life) with vibration dampening system.Highly accurate, freely moving sliding table with wear resistant guide rails and rollers.Specially designed roller carriage, utilizing alumi...
AMXmachinery
ENLAZADORA DE CAJONES - DODDS
PARTE:
12369 - ENLAZADORA DE CAJONES - DODDS
MUY BUENAS CONDICIONES -
COMO NUEVABrand: DoddsModel: SE-1-25AFCondition: Very GoodYear: 2019Voltage: 220/1/Condition: Very GoodWith automatic feed of the cutter for dovetailing standard
English dovetails on one or two inch centerlines.Servomotors control the automatic feed with the consistency
and reliability of servo components.Simple operationSpindle movement controlled by servomotors.Touch screen operator interface.Servo controls for co...