Identificador: 2238
Abierta
Descripción
PARTE: 12513 - PRENSA HIDRAULICA CHICA
USADA - BUENAS CONDICIONES
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 RPMModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil.Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 254 LITROS
PARTE:
2PG-DRAGON24 – HORNO PARA CERAMICA, VIDRIO, METALES – 254
LITROSNuevo con garantíaMax. Temperatura: 1287 grados centígrados16500 Watts, 69 Amps
Medidas interiores: 610 mm ancho x 610 mm fondo x 686 mm
altoPotters who struggle with top-loading kilns will enjoy the Dragon. The door
swings open 160 degrees on a heavy ¾” steel rod with sealed bearings. Two
spring-loaded latches press the door tightly closed.Quick to
loadIf you
fire ware that is similar in size from ...
AMXmachinery
PARTE: AMX-10160 - EXTRACTOR DE TUBO - DIAMETRO INTERNO 19-1/2” - MOTOR 3/4 HP
PARTE: AMX-10160 - EXTRACTOR DE TUBO - DIAMETRO
INTERNO 19-1/2” - MOTOR 3/4 HP
USADO - MUY BUENAS CONDICIONES -
TODOS LOS BALEROS NUEVOS
MOTOR 3/4 HP, 220/440V, 3 FASES, 60
HZ, 1500 RPM
DIAMETRO INTERNO: 19-1/2”
DIAMETRO EXTERNO: 22”
MEDIDAS TOTALES: 31” LARGO X 22” ANCHO
X 12” ALTO
CAUDAL: 8,712 M3/HR
HECHO EN MEXICO
AMXmachinery
CENTRO DE MAQUINADO
PARTE # 2MA-949VPKG - CENTRO DE MAQUINADONUEVO CON GARANTIAStandard Features: - Taiwan Mill- “Meehanite” Casting- “Turcite B” Coating on X/Y ways- ISO 9001 certified- Coolant system included- GMM-949V has variable spindle speeds from 70-4,300 rpm - Heavy duty 3 HP AC spindle motor, 3 phase ( for ideal of tapping jobs, we strongly recommend to take 3 phase mill with phase converter for single phase conversion )- Heavy Duty “Meehanite” casting- Hardened & ground dovetail guideways- ...