Identificador: 2372
Abierta
Descripción
PARTE: 12545 - LINEA DE PINTURA UV - SUPERFICI MINI PLUS
USADA - MUY BUIENAS CONDICIONES
Passline Height: 900 mm
Operating side: RH, as viewed from inlet of line, LH available as a special order.
Workpiece Dimensions (Approx.):
Min. - max. length: 300 mm - 4880 mm (12" - 16')
Min. - max. width: 25 mm - 1300 mm (1" - 51”)
Min. - max. thickness: 3 mm - 90 mm (1/8" - 3-1/2")
Max. weight: 3# per sq. ft
Speeds:
Mechanical speed: 1-3 m/min
Avg. production speed: 2 m/min
Connections:
Voltage: 480 V/ 3 Ph + Ground / 60 Hz
Standard distribution system: TN-S
Compressed air: 6 bars
Thermal connection (NOT required for sprayer – if optional dryer is
purchased, the heating coil is electric)With paper protective system for belt
conveyor.
CONVEYING SYSTEM AND PAPER
PROTECTION DEVICE
In-feed and out-feed driven roller conveyor system.
Central belt conveyor with protective paper device.
The paper function is to absorb the overspray, thus protecting the conveyor
belt underneath.
The machine is equipped with a paper roll unwinding system at the in-feed
and rewinding system at the out-feed.
GENERAL DESCRIPTION
The automatic through-feed spraying machine mod. MINI achieves the
advantages of automatic spraying process with a limited investment.
SPRAYING ARM AND LACQUER CIRCUITS
Lacquer application system consisting of a reciprocator with single arm
driven by brushless motor and sliding on a high precision linear guide.
Accurate motion guaranteed by high precision reducer.
The arm is equipped with guns holder supporting up to max four guns, with
two lacquer circuits.
To achieve a higher level of flexibility, the MINI features, as standard, the
QUICK-CHANGE system for the guns holder.
Approx size if unit is
Mini pluis sprayer is 12'
dryer is 25'
infeed table 8'
approx 45 feet long
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA DE BANCO DE 3 HP DISCO DE DIAMETRO DE 12”
PARTE: 12405-14 - SIERRA DE BANCO
DE 3 HP DISCO DE DIAMETRO DE 12”
USADA - BUENAS CONDICIONES
220V, 3 FASES
AMXmachinery
POSTFORMADORA - MIDWEST AUTOMATION 3110
PARTE # 11630 - POSTFORMADORA - MIDWEST AUTOMATION 3110EN BUENAS CONDICIONES DE OPERACIONOne man operation for inserting cove bars to manufacture 90 degrees backsplashes.Variable backsplash ht. and width as desired, fully self contained with heat bar, digital temperature controller, manually operated glue system.Capable of producing 1,500 lineal ft. of backsplash per shift.Traduccion:Operacion de 1 solo hombre para hacer zoclos de 90 gradosAltura y ancho de zoclo variable, barra de temperatura, ...
AMXmachinery
SIERRA MULTIPLE DE PANELES - 52" ANCHO
PARTE:
4ZA-MLS130PPD - SIERRA MULTIPLE DE PANELES - 52" ANCHO
NUEVA CON GARANTIA
CARACTERÍSTICAS TÉCNICAS:
- Regulación de profundidad de corte y de fresado sin
cambiar la altura del plano de trabajo respecto al suelo.
- Apertura del grupo de rodillos por cilindro neumático con
sensor temporizado, para simplificar el montaje de las herramientas.
bocas de aspiración Ø 200 mm, inferior y superior (Rif. 4)
- Capacidad de la aspiración de virutas a la velocidad de
30 m/s...
AMXmachinery
CEPILLO 2 CARAS 14", 16", 20", 24"
PARTE # 1N-CP2-016 - CEPILLO 2 CARAS - 16" ANCHO - MOTOR 5 HPPARTE # 1N-CP2-020 - CEPILLO 2 CARAS - 20” ANCHO - MOTOR 7.5 HPPARTE # 1N-CP2-024 - CEPILLO 2 CARAS - 24” ANCHO - MOTOR 10 HPPARTE # 1N-CP2-029 - CEPILLO 2 CARAS - 29" ANCHO - MOTOR 15 HPNUEVOS CON GARANTIACEPILLOS PARA USO PESADO INDUSTRIALCARACTERISTICASCEPILLO 14”CEPILLO 16”CEPILLO 20”CEPILLO 24”CAPACIDAD ANCHO14”16”20”24”CAPACIDAD ALTURA6”6”6”6”MOTORES PRINCIPALES (2)5 HP5 HP7.5 HP10 HPMOTOR ALIMENTADOR1...