Identificador: 121
Abierta
PARTE: 1SL-DC-WP0015 - CEPILLO 15" ANCHO - MOTOR ABAJO 3 HP, 2 o 3 FASES
AMXmachinery
Descripción
PARTE: 1SL-DC-WP0015 - CEPILLO 15" ANCHO - MOTOR ABAJO 3 HP, 2 o 3 FASES
NUEVO CON GARANTIA
MOTOR: 3 HP, 220V, 60 Hz, 1 o 3 FASES
MOTOR ABAJO
CAPACIDAD DE CORTE: 15" X 8"
MAX. PROFUNDIDAD DE CORTE: 1/8"
VELOCIDAD DE CABEZAL: 5250 RPM
VELOCIDAD DE ALIMENTACION: 16 Y 30 PIES/MIN
MEDIDAS: MESA CON EXTENSION DE RODILLOS: 15" X 40"
CANTIDAD DE CUCHILLAS: 3 PIEZAS
PESO: 202 KGS
TIPO DE EMPAQUE: 1 CAJA
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PUNZONADORA - HIDRAULICA - 40 TONS
PARTE: 12325 - PUNZONADORA - HIDRAULICA - 40
TONS
USADA - BUENAS CONDICIONES
Brand: Greenerd
Size: Length: 70 in.
Width: 44 in. Height: 96 in.
Country of
Manufacture: N/A
Weight (lbs, oz): 5934,
Tested and runs PLC
Lost its program
Safety's were
bypassed to test machine
Open height is
18-5/8"
Closed height is
6"
230/460V 3 Phase
Table Size
36"x16"
AMXmachinery
SOLDADORA DE MADERA - ALTA FRECUENCIA
PARTE: 2WR-3000 – SOLDADORA DE MADERA – ALTA FRECUENCIAGENERAL SPECIFICATIONS13 FOOT COAXIAL CABLESTANDARD HAND UNITMAXIMUM VOLTAGE 115 VACMAXIMUM CURRENT 15 AMPSFREQUENCY 27.12 M.C.RADIO FREQUENCYCERTIFICATE ATTACHEDPENETRATES 1 ½ INCHES OF WOODSHIPPING WEIGHT 134 LBS. SPECIAL FEATURESONE HAND OPERATION - leaves other hand free.RECESSED PANEL - protects instruments.RADIO FREQUENCY CERTIFICATE - per F.C.C. Regulations.13 FOOT COAX CABLE - reaches most jobs.LIGHT WEIGHT HAND UNIT - 2 lbs. 1...
AMXmachinery
PARTE: AMX-10166 - EXTRACTOR DE PARED - 17” X 17” - S & P
PARTE: AMX-10166 - EXTRACTOR DE PARED - 17” X 17” - S
& P
USADO MUY BUENAS CONDICIONES
MODELO: HXB-4-400/20
3,600 M3/HR
MOTOR: ¼ HP, 127V, 1 FASE, 2.2 AMP
RPM: 1625
MEDIDAS: 20” X 20” X 10”
AMXmachinery
PARTE: 2CA-RM70 - BASTONERA – CAPACIDAD 3/8” - 2-3/8” DIAMETRO
PARTE: 2CA-RM70 - BASTONERA –
CAPACIDAD 3/8” - 2-3/8” DIAMETRO
NUEVA CON GARANTIAThe unit is designed solely for shaping of round poles in wood working factory.The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.The cutting head has been proven flawless through experience and study of many years.The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molde...