Identificador: 2587
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
PARTE: 2GM-26120 - TORNO DE PRECISION - METAL - CAPACIDAD 26” X 120”
AMXmachinery1
Descripción
PARTE: 2GM-26120 - TORNO DE PRECISION - METAL - CAPACIDAD 26” X 120”
NUEVO CON GARANTIA
- ISO 9001 certified
- Large spindle bore 4-1/8”
- Heavy Duty spindle D1-8
- Heavy Duty guideway width 16”
- Heavy Duty main motor 10HP
- 16 spindle speeds from 25-1,600 rpm, 16 speeds
- 54 kinds of inch threads, and 54 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
| Max. swing over bed | 26" |
| Max. length of workpiece | 120" |
| Max. swing over cross slide | 17 1/4" |
| Max. Swing in gap | 35 3/8" |
| Width of Bed | 16" |
| Effective length in gap to spindle | 9" |
| Effective length in gap to chuck jaws | 4 1/2" |
| Spindle bore | 4 1/8" D1-8 |
| Taper of spindle center | M.T. #5 |
| Spindle speeds | 25-1,600 rpm / 16 steps |
| Longitudinal feeds | 0.0016-0.055 IPR, 25 kinds |
| Cross feeds | 0.0008-0.027 IPR, 25 kinds |
| Inch threads | 80-7/16 TPI, 54 kinds |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
PRENSA DE RADIO FRECUENCIA - 12" X 118"
PARTE: 2LO-PT-12118HF - PRENSA DE RADIO FRECUENCIA - 12" X 118"Special design for mass production for engineer flooring, door stile, long panel, 2 to 3 minute to dry per cycle.Automatic infeed, out-feed cycle, mass production within 3 - 5 minutes is ready for output.Shortens manufacturing procedures – no need to pass through for the dovetailing or joining process.Equipped with a massive upper plate supplies powerful hydraulic pressure, which presses each part of wood board to make even the mos...
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 5' X 10GA
PARTE: 2GM-0510E - DOBLADORA DE METAL 5' X 10GA This machine has a 3HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is...
AMXmachinery1
SIERRA MULTIPLE - RODILLOS - PIEZAS CORTAS
PARTE: 2CK-131HMMAIN FRAME, MACHINE BED & ENCLOSURE1 Piece – Extra Heavy 1 Piece Main Frame. Specially heat treated for maximum stability and minimum vibration43” (1.1 meter) long Adjustable Infeed Table (adjustable .4 inch) – measured from Btm. Head Infeed Bed Plate – head endAll Bedplates, Tables and Fences are Hard ChromedLift up sound and safety Enclosure including safety interlocks and good lightingDRIVE INCLUDESMaintenance free Full Cardan Shaft Drive to feedworks for balanced dr...
-500x500.png)
AMXmachinery1
TORNO 16'' X 40''
PARTE: 2GM-GML-1640HD - TORNO 16'' X 40'' ISO 9001 certifiedLarge spindle bore 2-1/16”Heavy Duty spindle D1-6One-piece solid cast iron machine baseHeavy Duty guideway width 10-1/4”Heavy Duty main motor 6 HP16 spindle speeds from 45-1,800 rpm, speeds: 45/70/90/108/140/165/215/255/330/385/510/585/770/900/1170/1800rpm45 kinds of inch threads, and 39 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced...