ID: 2587
Open
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Description
PARTE: 2GM-26120 - TORNO DE PRECISION - METAL - CAPACIDAD 26” X 120”
NUEVO CON GARANTIA
- ISO 9001 certified
- Large spindle bore 4-1/8”
- Heavy Duty spindle D1-8
- Heavy Duty guideway width 16”
- Heavy Duty main motor 10HP
- 16 spindle speeds from 25-1,600 rpm, 16 speeds
- 54 kinds of inch threads, and 54 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
| Max. swing over bed | 26" |
| Max. length of workpiece | 120" |
| Max. swing over cross slide | 17 1/4" |
| Max. Swing in gap | 35 3/8" |
| Width of Bed | 16" |
| Effective length in gap to spindle | 9" |
| Effective length in gap to chuck jaws | 4 1/2" |
| Spindle bore | 4 1/8" D1-8 |
| Taper of spindle center | M.T. #5 |
| Spindle speeds | 25-1,600 rpm / 16 steps |
| Longitudinal feeds | 0.0016-0.055 IPR, 25 kinds |
| Cross feeds | 0.0008-0.027 IPR, 25 kinds |
| Inch threads | 80-7/16 TPI, 54 kinds |
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachinery1
ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL Entry level with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end trimming, flush tri...
AMXmachinery1
LIJADORA DE BANDA ANCHA - MESA FIJA - 1 A 4 BANDAS
PARTE: 2CK-SUIncorporates a fixed table along with upper moving sanding units. This makes it ideal for in-line sanding or for use with conveyors as they do not need to be adjusted when changing material thickness. The digital thickness control will program the sanding units in accurately and precisely each time. The SU series is available with 1-4 sanding units and in widths of 24”, 36”, 43”, and 51”. Sanding units can be rubber or steel contact drums, combination sanding units (...
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - 3HP
PARTE: 2MK-CY/3.C - COLECTOR DE POLVOS - 3HPThe Dust Collector was developed for cabinet shops with high production. Collects dust of up to 3 machines simultaneously. A light weight and easily transportable machine.Technical InformationMotor Spec1 Phase 220V 3HP 15AAirflow Capacity1941 CFMSound Rating80dbFan Diameter14' / 356 mmNumber Inlet3"Inlet Size4"Filtration1- micronCartridge Filtration size13" x 31"Cartridge Bag Size14.5" x 29.5"Drum Size31 GalDrum Bag Size20" x 43"Machine Dimensions45" x...
-500x500.png)
AMXmachinery1
LIJADORA DE BANDA ANCHA - 2 BANDAS - 52" ANCHO
PARTE: 2EX-XS-2P52 - LIJADORA DE BANDA ANCHA - 2 BANDAS - 52" ANCHO75″ Belt LengthOver thickness safety deviceInfeed bed rollersDigital thickness controllerIndividual amp metersDisc brakes on sanding headsTelemecaique electricsCamozzi pneumaticsVariable speed drive systemSpecifications:Horsepower: 30/30 HPVoltage: 230V or 460VPhase(s): 3PHBelt Size: 52" x 75"CFM Requirement: 4800Main Motor: 30 / 30 HPFeed Motor: 3 HPElevation Motor: 0.5 HPContact Drum Size: 8" / 5"Conveyor Speed (ft/min): 15 ...