Identificador: 2582
Abierta
.PNG)
PARTE: 2GM-HS-1214M - GUILLOTINA MECANICA - 12 PIES LARGO X 14 GA
AMXmachinery1
Descripción
PARTE: 2GM-HS-1214M - GUILLOTINA MECANICA - 12 PIES LARGO X 14 GA
- ISO 9001 certified
- Taiwan machines
- Quick Change Blade Gap Adjustment
- CE standard “OMERO” electric control system
- Meet OSHA safety standard code
- Shadow line for accurate straight cutting
- Adjustable cutting length and stroke
- Ball transfer plates on worktable for easy loading workpiece
- Well balanced and sturdy all steel machine frame
- German made Hydraulic logic system centrally located and quiet
- Hydraulic hold-downs with anti-mar neoprene
- Shear blades are high grade carbon/chrome alloy steel and hardened
to 60 HRC, 2-edge indexable upper blade and 2-edge indexable bottom blade
- Full length viewable safety finger guard to protect operator from cutting hazard
- Removable safety foot pedal, automatic blade raise up on removal of foot from pedal
- Hydraulic, electrical overload protection
- Compact operator control panel
- All motors are overload protected & low voltage control system
- Jog or continuous auto cycle cutting operation modes
- 24” manual back gauge( one side wheel drive )
- 1 each 60” squaring arm with inlaid inch/metric dual scale
- Quick change blade gap adjustment (BGA)
- Shadow line for accurate straight cutting
- Material support and drop back chuter
- Upper and bottom blade set with 2-edge on bottom & 2-edge on upper
- 2 each 24” front support arms
- Hydraulic hold-downs with anti-mar neoprene
- Full length viewable finger guard
- Removable safety foot pedal
- Tool box
Cutting capacity: Mild steel Stainless steel soft alminum min. thickness |
12’ x 14 Ga. 12’ x 18 Ga. 12' x 10 Ga. 22Ga |
| Blade length | 12' |
| Strokes per minute | 10-12 |
| Throat depth | 18" |
| Worktable height | 34 1/2" |
| Front support arm | 24" |
Back gauge | 24" manual back gauge |
| Blade rake angle | 2 degree |
| Oil tank cap. | 26 Gal. |
Main Motor | 10 HP, 220V/35A - 440V/20A |
| Machine weight | 9150 LBS |
| Machine dimensions | 195"x44"x66" |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CEPILLO 1 CARA - 20 PULGADAS
PARTE: 2CK-P508HVHas a solid steel helical cutterhead with two-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting the table height is quick, accurate, and easy. The frame is made from heavy cast iron with known vibration damping resulting in long bearing life and superior cut quality. The planer’s segmented, serrated infeed roll & segmented pressure shoe ensures material is held firmly during the feeding and planing p...
-500x500.png)
AMXmachinery1
FINGER JOINT AUTOMATICA
FINGER JOINT AUTOMATICA PARTE: 2CK-FL03Is a cutting-edge fully automatic finger jointing production line, designed to efficiently convert wood waste into valuable materials while maintaining an excellent performance-to-cost ratio. With its innovative technology, this system offers remarkable value in terms of both performance and price, the entire machining procedures from workpiece in-feed, left and right shaping to jointing is fast, smooth and accurate. The whole production line i...
AMXmachinery1
SIERRA MULTIPLE - 1 SIERRA - 12 PULGADAS
PARTE: 2CK-C12RSHIs a single-blade ripsaw geared towards the shop looking to increase efficiency in their ripping operations but can not justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the C12RSH can produce a glue joint finish ready for panel glue-up right out of the saw.Produces a guaranteed glue joint finish to 10′, which eliminates the need to joint the material after rippingPrecision straight line feeding for parallel and...
-500x500.png)
AMXmachinery1
SIERRA VERTICAL - 74" ALTO X 64" ANCHO
PARTE: 2SS-C5 - SIERRA VERTICAL - 74" ALTO X 64" ANCHOThe portable panel saw features a 64″ maximum crosscut and cuts material up to 1.75″ thick. Photos are shown with a stand and wheels, which are optional accessories.Motor Horsepower, Amperage and Volts3.25 HP, 15 amp, 120 Volt3.25 HP, 7.5 amp, 220 VoltStandard EquipmentZinc plated 1 ¾” steel guide tubes.Milwaukee Tool motor4 Nylatron roller bearing systems.Adjustable vertical and horizontal rulers.Quick change from vertical to horizo...