Identificador: 2582
Abierta
.PNG)
PARTE: 2GM-HS-1214M - GUILLOTINA MECANICA - 12 PIES LARGO X 14 GA
AMXmachinery1
Descripción
PARTE: 2GM-HS-1214M - GUILLOTINA MECANICA - 12 PIES LARGO X 14 GA
- ISO 9001 certified
- Taiwan machines
- Quick Change Blade Gap Adjustment
- CE standard “OMERO” electric control system
- Meet OSHA safety standard code
- Shadow line for accurate straight cutting
- Adjustable cutting length and stroke
- Ball transfer plates on worktable for easy loading workpiece
- Well balanced and sturdy all steel machine frame
- German made Hydraulic logic system centrally located and quiet
- Hydraulic hold-downs with anti-mar neoprene
- Shear blades are high grade carbon/chrome alloy steel and hardened
to 60 HRC, 2-edge indexable upper blade and 2-edge indexable bottom blade
- Full length viewable safety finger guard to protect operator from cutting hazard
- Removable safety foot pedal, automatic blade raise up on removal of foot from pedal
- Hydraulic, electrical overload protection
- Compact operator control panel
- All motors are overload protected & low voltage control system
- Jog or continuous auto cycle cutting operation modes
- 24” manual back gauge( one side wheel drive )
- 1 each 60” squaring arm with inlaid inch/metric dual scale
- Quick change blade gap adjustment (BGA)
- Shadow line for accurate straight cutting
- Material support and drop back chuter
- Upper and bottom blade set with 2-edge on bottom & 2-edge on upper
- 2 each 24” front support arms
- Hydraulic hold-downs with anti-mar neoprene
- Full length viewable finger guard
- Removable safety foot pedal
- Tool box
Cutting capacity: Mild steel Stainless steel soft alminum min. thickness |
12’ x 14 Ga. 12’ x 18 Ga. 12' x 10 Ga. 22Ga |
| Blade length | 12' |
| Strokes per minute | 10-12 |
| Throat depth | 18" |
| Worktable height | 34 1/2" |
| Front support arm | 24" |
Back gauge | 24" manual back gauge |
| Blade rake angle | 2 degree |
| Oil tank cap. | 26 Gal. |
Main Motor | 10 HP, 220V/35A - 440V/20A |
| Machine weight | 9150 LBS |
| Machine dimensions | 195"x44"x66" |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - 1HP
PARTE: 2MK-CP/1.C - COLECTOR DE POLVOS - 1HPIs Ideal for collecting light powder from small machines, it has an adapter that can be attached to the end of the hose making it easier whenever cleaning the floor. Technical InformationMotor Specs1 HP 1 PHASE 127 V – 16 AAir Flow Capacity600 CFMBag volume60 L (2.12 ft³)Number of Inlet1Inlet Size4"Filtration1 micronBag size14" x 25" | 371mm x 635mmWeight73 Lbs
-500x500.png)
AMXmachinery1
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL Entry level with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end trimming, flush tri...
AMXmachinery1
EXTRACTOR - CAMPANAS DE EXTRACCION PARA COCINA
PARTE: 1AM - EXTRACTOR - CAMPANAS DE EXTRACCION PARA COCINA-FABRICADAS EN ACERO INOX. P3, GRADO ALIMENTICIO - PARTE FRONTAL, LATERALES, TECHO Y FILTROS EN LAMINA
CAL. 20 CON GOTERÓN EN LAMINA CAL. 18 - SOPORTA FILTROS Y RESPALDO EN LAMINA GALVANIZADA - INCLUYE FILTROS TIPO LABERINTO
- INCLUYE CAPELOS PARA ILUMINACIÓN - NO INCLUYE DUCTERÍA NI EXTRACTOR
Cantidad de
Capelos
Largo
1
1 m
2
1.5 m
...
AMXmachinery1
PARTE: 2CK-LBS300-5S - LIJADORA DE MOLDURAS - 3 CARAS
PARTE: 2CK-LBS300-5S - LIJADORA DE MOLDURAS - 3
CARASEliminate hand sanding with our economical
sanding and de-nibbing solution for linear profileDesigned to help with your everyday linear profile sanding needs. It can be used for white wood sanding and sealer sanding of linear parts such as mouldings, flooring, furniture components, window parts etc. The machine works well as a standalone unit, or as part of the finishing line.Designed for sanding linear profiled wood on three sidesBrushing h...