Identificador: 3067
Abierta
ID de articulo : # 3067 se ha agregado a su lista de deseos.
.PNG)
.PNG)
Descripción
PARTE: 3HO-HT600CY - ENCHAPADORA DE CANTOS COMPACTA CON TUPI DE ENTRADA
The single-sided edge banding machine is designed for bonding rectangular workpieces with various edge materials: PVC, ABS, acrylic.
| Banding Tape Thickness | 0.3-3mm |
| Banding Tape Width | 12-60mm |
| Workpiece Thickness | 10-55mm |
| Workpiece Length | >=80mm |
| Workpiece Width | >=45mm |
| Feeding Speed | 12m/min |
| Heating Power | 1.8kw |
| Pre-milling Motor Power | 1.8kw x 2 |
| Feeding Motor Power | 1.5kw |
| Glue Spreading Motor Power | 0.75kw |
| End Trimming Motor Power | 0.37kw x 2 |
| Fine Trimming Motor Power | 0.75kw x 2 |
| Rough Trimming Motor Power | 0.75kw x 2 |
| Polishing Motor Power | 0.18kw x 2 |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
-500x500.png)
AMXmachinery1
LIJADORA DE BANDA ANCHA - 2 BANDAS - 43" ANCHO
PARTE: 2EX-XS-2P43 - LIJADORA DE BANDA ANCHA - 2 BANDAS - 43" ANCHO43" 30 / 25 HP Performa Series Wide-Belt Sander75″ Belt LengthOver thickness safety deviceInfeed bed rollersDigital thickness controllerIndividual amp metersDisc brakes on sanding headsTelemecaique electricsCamozzi pneumaticsVariable speed drive systemSpecifications:Horsepower: 30/25HPVoltage: 230V or 460VPhase(s): 3PHBelt Size: 43" x 75"CFM Requirement: 4200Main Motor: 30 / 25 HPFeed Motor: 3 HPElevation Motor: 0.5 HPContact ...
AMXmachinery1
ALIMENTADOR - 2048
PARTE: 2JG-STEFF-2048 - ALIMENTADOR 20484) Rollers and (8) speeds of 6-13-18-21-36-42-54-102 FPM0.7/1 HP motor4-3/4" roller diameter2-1/4" roller widthComplete with universal support columnWeight: 163 lbs.
-500x500.png)
AMXmachinery1
CEPILLO 2 CARAS - 16” ANCHO X 6.7” ALTO - ESPIRAL - CANTEK
PARTE:
2CK-GT400BRD - CEPILLO 2 CARAS - 16” ANCHO X 6.7” ALTO - ESPIRAL - CANTEKHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system while the infeed bed is adjustable to determine how much material is removed. The final thickness is keyed in the digital control and the top head & feed assembly...