Identificador: 2142
Abierta
Descripción
PARTE: 2PR-100 - COLECTOR DE ASERRIN - MODULAR - MOTOR 10 HP
Nuevo con Garantía
Size: 90 cm ancho x 275 cm largo x 275 cm alto
Filtros: 18 filtros en total 19.33 m²
Hardware:
~ Reverse incline material handling impeller
~ 10 gauge construction
~ Pneumatic vibrational pack
~ 10 HP Siemens Cast Iron Motor
~ 10” Diameter Filters
~ Interior baffle to assist in even filling
Specs:
~ 5000cfm @ 6” Static Pressure with 15” duct (This is the size of our inlet, no reducer needed.)
~ 4500cfm @ 6.5” Static Pressure with 14” reduction inlet. (This is recommended trunk size.)
~ 3200cfm @ 8.5” Static Pressure with 12” reduction inlet.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
SECADOR DE AIRE - PARA AIRE COMPRIMIDO
PARTE: 12342 - SECADOR DE AIRE - PARA AIRE COMPRIMIDO
USADO - BUENAS CONDICIONES
Actualmente esta en servicioSpecifications:460V,
3 Phase. 60 HzLow
Side Circut Design Pressure: 1,9 Mpa, 19 Barg, 276PsigHigh
Side Circut Design Pressure: 2,8 Mps, 28 Barg, 406 PsigMaximum
Air Input: 60 Degrees C (Low), 140 Degrees (High)Minimum
Ambient Temperature: 5 Degrees C (Low), 41 Degrees F (High)Maximum
Ambient Temperature: 50 Degrees C (Low), 122 Degrees F (high)Minimum
Circuit Ampacity: 5.0 AM...
AMXmachinery
SIERRA DOBLE 45 GRADOS
PARTE # 2NE-T-400 - SIERRA DOBLE 45 GRADOS - DISCOS 16"Designed to cut 45 degree mitres precisely for picture framing and woodworking applications such as windows, doors, and furniture components. The T-400 can handle all wood, plastic, and metal materials with a moulding height up to 3 ½" (80mm) and a moulding width up to 4" (100mm).This heavy duty saw is built for medium to high production environments. Its unique pneumatic control system results in a very smooth down-stroke movement, precise...
AMXmachinery
MESA DE TIJERA 36" X 72"
PARTE:
2SW-LS4-36 - MESA DE TIJERA - PLATAFORMA 36" X 72"Nuevas con garantíaHechas en USAMedidas y capacidad
para manejar 1 bulto de MDF, Aglomerado, etc. a la vez para alimentar
maquinaria para la madera,CAPACITY: 4,000 lb. uniform load.PLATFORM: 36" x 72" smooth
plate with 4" Fork Risers.BASE FRAME: 24" x 48" with lag plates
and maintenance device.LOWERED HEIGHT: 6-3/4"VERTICAL TRAVEL: 36"RAISED HEIGHT: 42-3/4"ELEVATING TIME: 44 seconds (approx.)LOWERING TIME: Adjustable with p...