Identificador: 1302
Abierta
PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
AMXmachinery
Descripción
PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIA
One way feeding only
Work width: 250 mm (25 degrees), 55 mm (60 degrees)
Work Height: 180 mm
Knife bias angle: 0 - 60 degrees variable
Feed speed: 88 m/min (60hz), 73 m/min (50hz)
Feed motor : 2.2Kw x 2 motors
Head up/down motor: 0.2 Kw
2 knife stocks on top and bottom surfaces
Knife type: Changing blade type
Knife size: 335 length x 66 x 8 mm
Accessories: Changing blades and standard tools
Machine size: (WxLxH): 940 x 1920 x 1405 mm
Net Weight : 1,080 Kg
Packing size: (WxLxH): 1200 x 2150 x 1750 mm, G/W: 1,350 kg
Top planing and bottom planing performed by one machine. Since two knives, one for rough planing and one for finish planing are set at both of top and bottom, both sides can be planed with just one workpiece feed. Therefore, planing time can be shortened considerably. It can also be built into a line. Variable bias angle system permits to choose the optimum bias angle to obtain the best finishing for the workpiece according to its hardness and moisture content.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12177 - PEGADORA – 16 SECCIONES – HIDRAULICA
PARTE: 12177 - PEGADORA –
16 SECCIONES – HIDRAULICA
USADA
– EN BUENAS CONDICIONES
AMXmachinery
SOLDADORA DE SIERRA CINTAS
PARTE: 4VF-VC4 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 10 – 40 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm
AMXmachinery
LIJADORA DE CEPILLO TAMBOR NEUMATICO
PARTE: 2SR-DB-612DLX - LIJADORA DE CEPILLO Y TAMBOR NEUMATICOTambor neumatico disponible en 5 diametros, de 2” to 8”.El cepillo lija partes irregulares sin perder la forma o detalleMaquina standard: Equipada con tambor neumatico de 6” diametro x 7” ancho y cabezal de cepillo con 12 cepillos individuales y motor 3/4 HP2 llaves requeridas (no incluidas)Tambien disponible en cualquier combinacion de cabezasHecha en Estados Unidos, con estandares EstadounidensesMotor de uso rudo de ¾ HP, 1...
AMXmachinery
PARTE: 12331 - EXTRACTOR - MOTOR 60 HP - CON 3 CICLONES
PARTE: 12331 - EXTRACTOR - MOTOR 60 HP - CON 3 CICLONES
USADO - BUENAS CONDICIONESMotor 60 HPEntrada de 24" diámetroTurbina de 48" diametroFlecha 3" diametro3 ciclones