Identificador: 2199
Abierta
Descripción
PARTE: AMX-12490 - EXTRACTOR DE TURBINA - DAYTON
USADO - MUY BUENAS CONDICIONES
BALEROS NUEVOS
Medidas totales: 25” ancho x 17” fondo x 20” alto
Entrada redonda: 7”
Salida redonda: 5”
Motor: 3 HP, 230/460V, Amp 8.2/4.1, RPM 3490, Marca Dayton
Video: https://vimeo.com/870516485
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MOLDURADORA 5 CABEZALES
PARTE # 12WG-UNIMAT 217 - MOLDURADORA - 5 CABEZALESMOLDURADORA AUTOMATICA5 CABEZALESCARACTERISTICAS GENERALES:KW (HP) rpm Tool cutting circle1 - 7,5 (10) with Electronic Brake 6000 5“ – 5-11/16“2 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“3 - Joint Motor together with Right 6000 5“ – 7-7/8“4 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“5 - 7.5 (10) with Electronic Brake 6000 5“ – 7-7/8“ Tool arrangement BRLTBWorking width 3/4“ – 9“Working height 5/16...
AMXmachinery
ASTILLADOR - 75 HP - BAJA VELOCIDAD - WEIMA
PARTE: 12406 - ASTILLADOR - 75 HP - BAJA VELOCIDAD - WEIMA
Usado - Buenas Condiciones2004
Model WLK 13/75 Low Speed, Hopper StyleBatch
style with 75 HP low speed rotor, top feed hopper, self contained hydraulic
system with hydraulic ram, and controls.
Controls
operate the ram which forces material against the low speed rotor. Controls
vary the hydraulic pressure based upon the load on the rotor motor.
Features
reversible carbide cutters on large diameter rot...
AMXmachinery
MOLDURADORA 4 CABEZALES
PARTE # 32A-M410 - MOLDURADORA 4 CABEZALES - ANCHO 10" - 3 FASES PARTE # 32A-M410S - MOLDURADORA 4 CABEZALES - ANCHO 10" - 2 FASESPARTE # 32A-M412 - MOLDURADORA 4 CABEZALES - ANCHO 12" - 3 FASESNUEVAS CON GARANTIACARACTERISTICASM-410M-410SM-412ANCHO MAXIMO TRABAJO10”10”12”LARGO MINIMO MATERIAL10”10”10”VOLTAGE3 FASES2 FASES3 FASESMOTOR SUPERIOR4 HP3 HP7.5 HPMOTOR INFERIOR4 HP3 HP5 HPMOTOR LADOS (2)4 HP3 HP4 HPCABEZALES LATERALES 30 MM – ESTILO EUROPEOSISISICAP. CORTE CABEZAL SUPERI...
AMXmachinery
OPTI-CONTROL - WEINIG - OCMS
PARTE: 12382 - OPTI-CONTROL - WEINIG
- OCMS
USADA - BUENAS
CONDICIONESElectronic
Measuring and Indicating SystemMaximum
Measuring Width: 13"Maximum
Tool Diameter: 11-3/4"Electronic
measuring via electronic digital readouts for radial and axial measurementsWired
110V Single Phase
Year:
2003