ID: 2071
Open
Description
PARTE: - ASTILLADOR DE MADERA - ASTILLAS REBABAS GRANDES - NEWMAN
Usada - Buenas Condiciones
MARCA: NEWMAN
MODELO: SS24
ALIMENTADOR VIBRATORIO
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: AMX-10169 - LIJADORA DE BANDA - LIJA 590 CM X 6” ANCHO
PARTE: AMX-10169 - LIJADORA DE BANDA - LIJA 590 CM X 6” ANCHO
USADA – MUY BUENAS CONDICIONES
1 LIJA BANDA NUEVA INSTALADA Y 8 LIJAS DE REPUESTO GRANO
150 NUEVAS
MOTOR: 3 HP (2.2
KW), 220/380V, 60 HZ, 3 FASES, 1,710 RPM - CONECTADO A 220V
ARRANCADOR THERMOMAGNETICO 3 HP - NUEVO
TODOS LOS BALEROS NUEVOS: MOTOR, CHUMACERAS, GUIAS MESA,
GUIA PRENSA PULIDORA
MEDIDAS MESA: 76”
ANCHO X 38” FONDO
MEDIDAS TOTALES: 123” ANCHO X 46” FONDO X 61” ALTOVIDEO: https:/...
AMXmachinery
PEGADORA CANTO CHAPA - ESPESOR 0.5 - 5.0 MM
PARTE # 3NN-VENEERPLUSG2 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPASistema de pegamento integrado Machine SpecificationVeneer Strip Thickness (depending on veneer condition)：approx. 0.5 ~ 5.0 mmVeneer Strip Length：min. 350 mmVeneer Strip Width：min. 45 mmProduction Speed：approx. 8 ~ 45 m/min. (depending on veneer strip thickness)Electric Power：approx. 10.8 kwCompressed Air：5 barHeating Temperature：100 ~ 220 °CHeating Zone：1500 mmDimensions (L x W x H)：2550 x 2100 x 1600 mmNe...
AMXmachinery
INDEX TABLE PVA COLD PRESS
PARTE # 2EV-4243 - INDEX TABLE - EVANS 4243Semi-automatica para laminacion de tableros PVA, alimentacion izq a der.Semi-automatic Index Table for PVA Panel Laminating- 80 PSI required- Standard Features:- Max. Board size, 62" X 145"- Min. Board size, 9" X 27"- In feed height 43”.- Out feed height 40”.- Open center for customer supplied scissors lift.- 18" extensions on in feed side.- Hand crank for width adjustment one revolution equals approx. 7".- Adjustable guides for board positioning.-...
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-72550 - LIJADORA DE 1 TAMBORES - 25”- 50” DE ANCHOSPECIFICATIONSSanding Capacity:Maximum Width (in): 50 (two passes)Minimum Length (in): 2-1/4Maximum Thickness (in): 4Minimum Thickness (in): 1/32Dimensions (in):46L x 27W x 53H (on stand)Drum:5 x 25 extruded aluminumDrum Speed:1740 RPMDust Hood:1- 4″ vacuum port, min. 600 CFM recommendedConveyor Motor:43 in.-lb. torque, direct drive D.C. motor, ranged variable 0-10 FPMDrive Motor (TEFC):1-3/4 HPPower Requirements110 V 20 ampShi...