Identificador: 3295
Abierta
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 2LO-PT-408S3HF-S - PRENSA DE RADIO FRECUENCIA - 3 LADOS - 4' X 8'
- Mass production for wooden board, 2 to 3 minute for drying a 4' x 8' or 5' x 10' wooden board
- Automatic infeed, out-feed cycle, mass production within 3 - 5 minutes is ready for output.
- Shortens manufacturing procedures – no need to pass through for the dovetailing or joining process.
- Equipped with a massive upper plate supplies powerful hydraulic pressure, which presses each part of wood board to make even the most crooked pieces of wood flat.
- Due to the flatness it has made, there is may not needs to pass through double side planer processing. This substantially reduces wood loss.
- User friendly operations; it is equipped with side automatic inlet and outlet feeding table system for continuous and mass production.
- Top quality wood board is manufactured by way of glue cured and completely hardened glue joins with high frequency heating in the meantime.
- All processing steps are integrated into the HMI interface control panel for easy one-touch control on the screen.
- Utilizes high frequency, glue cured evenly from inner of the glue line of the wood.
Specification:
| Model No. | PT-408S3HF-S | PT-510S3HF-S |
| In Put Power | 50 KVA | 60 KVA |
| Out Put Power | 30 KW | 40 KW |
| Max. Working Width | 49" | 60" |
| Max. Working Length | 110" | 120" |
| Working Height | 9/16" ~ 2-3/4" | 9/16" ~ 2-3/4" |
| Pressure | 65 kg/cm2 | 65 kg/cm2 |
| Hydraulic Pump | 5 HP | 7-1/2 HP |
| Press Cylinder (top) | 2 Pcs | 3 Pcs |
| Press Cylinder (Rear) | 12 Pcs | 13 Pcs |
| Out Feed Rollers (Left) | 2 Pcs | 2 Pcs |
| Machine Size (Lx W x H) | 155" x 67" x 83" | 165" x 80" x 92" |
| Machine Weight | 12300 LBS | 14800 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
ENGANCHADORA CON CONTROLADOR NC
PARTE: 2GM-HBB-1010NC - ENGANCHADORA CON CONTROLADOR NC ISO 9001 certified Meet OSHA and CE safety standard48” NC table back gauge with fingers Max. 16 bends per program Upto 100 Program Storage Programmable Angle/ Angle Correct NC ram height control for open hemming Hardened fingers and table Germany Rexroth hydraulic system Yaskawa Servo motors and Drives Schneider electrical components All steel construction for maximum rigidityHydraulic ...
AMXmachinery1
LIJADORA DE BANDA VERTICAL - HEAVY DUTY - 9"
PARTE: 2CK-OES509D - LIJADORA DE BANDA VERTICAL - HEAVY DUTY - 9"Is the ideal edge sander for demanding applications for production use. Equipped with a 9” high oscillating sanding belt, it is ideal for sanding drawer boxes, doors, furniture components and more. Is also equipped with dual front and rear tables which are adjustable up & down and can be tilted to 45 degrees, allowing for a wide range of applications and for full utilization of the sanding belt. The dual tables also allow ...
-500x500.png)
AMXmachinery1
CORTADORA DE METAL Y FRENO HIDRAULICO 4 PIES
PARTE: 2GM-HBB-0410 - CORTADORA DE METAL Y FRENO HIDRAULICO 4 PIES Our 4 FT Sheet Metal Hydraulic Box and Pan Brake is a heavy duty hydraulic box and pan brake; constructed of steel for maximum rigidity. Equipped with a robust and quiet German Rexroth hydraulic logic system to clamp your workpiece with ease. Our box and pan brakes are made for simple operation with a conveniently located control panel to place on either side of the hydraulic brake.Taiwan MachinesI...
AMXmachinery1
LIJADORA DE CANTOS
PARTE: 2PI-220 - LIJADORA DE CANTOSfeatures two counter-rotating spindles to be used with brush type sanding wheels. This allows parts to be sanded without noticeable rounding over on corners. The sanding technique is to sand the left corners on the right sander and the right corners on the left sander. This method has the brushes formed to the profile as they go over the corners.designed for flexible brushes2 upper and lower sanding headstable moves up and down, allowing the user to sand certa...