Identificador: 908
Abierta
Descripción
PARTE # AMX-10016 - ROUTER INVERTIDO - CR ONSRUD 2408
EN MUY BUENAS CONDICIONES
MARCA: CR ONSRUD
MODELO: 2408
MOTOR: 7.5 HP, 230V, 3 FASES, 60 HZ
MESA: 91 CMS FRENTE X 61 CMS FONDO
GARGANTA: 61 CMS
SALIDA EXTRACION: 6" DIAMETRO
MEDIDAS TOTALES: 95 CMS FRENTE X 135 CMS FONDO X 170 CMS ALTO
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12474 - PINCH ROLLER - EVANS
PARTE: 12474 - PINCH
ROLLER - EVANS
USADA - BUENAS CONDICIONES
Safety Gates on In-Feed and Out-Feed
Solid Top and Bottom Rollers
Feed Rate: 50’ FPM
Maximum Width: 62”
Maximum Thickness: 2”
Thickness adjustable by spacers
Work Height: 30-1/2”
Drive Motor: 1/2 HP
Electrical: 120 V, 1 PH,
60 Hz
Air Requirement: 100 PSI
AMXmachinery
PARTE: 2TA-PT-48HF – PRENSA DE TABLEROS - ALTA FRECUENCIA – ALTA PRODUCCION – CAPACIDAD 49” X 98”
PARTE: 2TA-PT-48HF – PRENSA DE TABLEROS - ALTA FRECUENCIA – ALTA PRODUCCION – CAPACIDAD 49” X 98”New with warrantyMass production for wooden board, 2 to 3 minute for drying a 4' x 8' wooden boardAutomatic infeed, out-feed cycle, mass production within 3 - 5 minutes is ready for output.Shortens manufacturing procedures – no need to pass through for the dovetailing or joining process.Equipped with a massive upper plate supplies powerful hydraulic pressure, which presses each part of wo...
AMXmachinery
PARTE: - ASTILLADOR DE MADERA - ASTILLAS REBABAS GRANDES - NEWMAN
PARTE: - ASTILLADOR
DE MADERA - ASTILLAS REBABAS GRANDES - NEWMAN
Usada - Buenas CondicionesMARCA: NEWMANMODELO: SS24
ALIMENTADOR VIBRATORIO
AMXmachinery
ESPIGADORA 2 MESAS
PARTE: 2TA-SET-100 - 3YC-YRT-115 - ESPIGADORA - 2 MESAS - AMX MACHINERYNueva con garantiaBuilt with two working tables for high efficiency operations.Table longitudinal traverse is pneumatic operated for smooth cutting.Tenon’s width is easily adjustable by hand wheel.Convenient tenon depth adjustment from outside without removing covers.Table can be tilted to 20 degrees at each side for angular tenon.Cutter moving speed is infinitely adjustable to achive the best results.Pneumatic hold down c...