Identificador: 962
Abierta
Descripción
PARTE: 12126 - ROUTER PIN INVERTIDO - CR ONSRUD 3025
USADO – EN BUENAS CONDICIONES – LIMPIADO Y REVISADO
230V, 3 PH, 60 CY
5 HP motor, belt driven to spindle
20,000 RPM spindle speed
Pneumatic spindle and guide pin movement via foot pedal
3" spindle travel
24" x 36" acrylic topped table
30" throat depth
Three position adjustable depth stop
1/2" max. chucking capacity
"Fog Mist" lubricated spindle system
Automatic pre-lubrication of spindle bearings (each time spindle is started)
Magnetic starter with overload protection
Dust collection requirements: 500 CFM
Compressed air requirements: 80 PSI (4.5 CFM)
Shipping weight: 1,100 lbs.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12635 - ESPIGADORA – MESA DOBLE – BACCI
PARTE: 12635 - ESPIGADORA
– MESA DOBLE – BACCI
USADA – MUY
BUENAS CONDICIONES
Spindle Speed: 5,700 RPM
Maximum Tenon Lenght:
110mm
Maximum Tenon Depth: 90mm
Maximum Tenon Thickness:
40mm
Cutterhead Motor: 4 HP
Motor for Table Movement:
1 HP
Motor for Cutterhead
Cycle: 1.5 HP
Two Pneumatic Hold-Downs
Twin 15" x 12"
Tables
Manual Hand-Cranks for
Set-Up
Push-Button
Controls
380/400v,
3ph
AMXmachinery
REDUCTOR DE VELOCIDAD - 1 HP - 30.1
PARTE: AMX-10150 - REDUCTOR DE VELOCIDAD - 1 HP - 30.1
USADO - BUENAS CONDICIONES
MOTOR 1
HP, 208-230/460V, 3.6/3.6 AMP
MAX
OUTPUT TORQUE: 1260 LBS
GEAR
RATIO: 30.1
MAX INPUT
HP 1.5 AT 1750 RPM
TYPE: QC
US ELECTRICAL MOTORS
MEDIDAS: 17” LARGO X 9” FONDO X 9”
ALTO
-500x500.jpg)
AMXmachinery
LIJADORA DE TAMBOR
PARTE: 2LO-DS-2500 - LIJADORA DE TAMBOR - 25" DE ANCHOPARTE: 2LO-DS-3700 - LIJADORA DE TAMBOR - 37" DE ANCHOCaracteristicas:- Easily operate with performance for sanding flat objects.- Heavy sheet metal cabinet stand.- Balanced cast aluminum sanding drums.- Two different grits and level sanding drums are designed for fast and fine finish at one pass.- First drum is cast aluminum; second drum is coated with rubber for fine sand paper.- Automatic feeding operates by non-slipping rubber grips conve...
AMXmachinery
TRITURADOR - ASTILLADOR MADERA - 58” - PRECISION
PARTE: 12544 - TRITURADOR - ASTILLADOR MADERA - 58” -
PRECISIONUSADO - BUENAS CONDICIONES6 NAVAJAS
TOP DISCHARGE