Identificador: 1773
Abierta
Descripción
PARTE: 2CK-HB950A
Is a heavy duty 37” bandsaw that is built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes the bandsaw unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 10HP motor allowing you to make your cuts with ease. With a large cutting height capacity under the guide of up to 22” it can also be ideal for cutting materials such as foam. This bandsaw delivers high accuracy for maximum production along with a simple design that assures minimum maintenance.
- 2-in-1 bandsaw can run up to a 2” wide blade for resawing and down to a ¼” for curve cutting
- 22” maximum cutting heigh under the guide
- Large capacity of 36 ½” from the blade to the throat
- Cast iron saw wheels are precision machined and laminated with rubber for accurate blade tracking and slippage prevention
- Cast iron worktable is precision ground and can tilt to 45o
- Blade tension is conveniently adjusted by means of a handwheel and tension is shown by a scale for accurate tension setting.
- Heavy gauge steel frame ensures vibration free cutting
KEY ADVANTAGES
- Upper and lower guide assemblies with Bakelite side guides to ensure cool running of the saw blade and a back guide thrust bearing
- Micrometric adjustment to upper guide by rack and pinion
- Foot brake for quick stopping of the blade
|
Saw Wheel Diameter |
37″ |
|
Table size |
45-1/4” x 31-1/2″ |
|
Table Tilting |
0°~45° |
|
Throat Capacity |
36-1/2″ |
|
Height capacity |
22″ |
|
Width of wheel |
2″ |
|
Blade speed |
5500 FPM |
|
Blade length |
259” – 261″ |
|
Blade width |
1/4″~2″ |
|
Motor |
10HP |
|
Dust hood diameter |
Ø4″ * 2 |
|
Net weight |
1584 lbs. |
|
Gross Weight |
2046 lbs. |
|
Machine Size(L*W*H) |
63.75″ x 32.7″ x 113.4″ |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CEPILLO 1 CARA - 26 PULGADAS
PARTE: 2CK-CM626Is a production planer with high horsepower and feed rates. It is equipped with our spiral insert knife cutterhead with two sided replaceable knives which produce a smooth planed finish with maximum cutting depth. With upper and lower driven feed rollers can plane even the most difficult to feed material. The powerful 20HP motor can ensure optimum stock removal even on full width boards. With infinitely variable feeds the operator has full control to ensure the optimum fe...
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 4' X 1/4''
DOBLADORA DE METAL 4' X 1/4'' PARTE: 2GM-HBR-04254 foot plate rolls are made for bending and rolling 1/4" metal sheets or plates into cones and other cylindrical shapes. All three rolls are hydraulic driven, hardened, and made of high grade alloy steel. Equipped with a cone attachment, LED digital readout, operation pedal controls safety line, and a quiet hydraulic system.ISO 9001 certifiedTaiwan Machines All three rollers are drivenAll three rollers are ha...
-500x500.png)
AMXmachinery1
ARMADORA DE BASTIDORES - HUSILLO DOBLE
PARTE: 2RI-R220T - ARMADORA DE BASTIDORES - HUSILLO DOBLEStandard Features:1.5 HP Spindle Drive Motor, TEFCFoot Actuated Boring Cycle14 Degree Double Spindle6,100 RPM Spindle Speed24" x 30" Table AreaAdjustable Fence with (2) StopsTooling IncludedTechnical Data and Specifications:Electrical: 110/120V, 60Hz, 20AAir: 2 CFM at 80 – 100 PSIWork Height: 38.25"Footprint: 34.5" x 25.25"
AMXmachinery1
SIERRA VERTICAL - 64" ALTO X 120" ANCHO
PARTE: 2SS-7000 - SIERRA VERTICAL - 64" ALTO X 120" ANCHOHeavy duty induction motors allow for cutting all day with an option of single or three phase power. All of our machines are built to last; gives you that extra motor efficiency with little to no maintenance required. Longevity is made possible by high induction motors supported by US precision machined components.The Panel Saw cuts horizontally and vertically, within .015” straight and square, and has a maximum panel thickness of 2”...