Identificador: 3078
Abierta
.PNG)
Descripción
PARTE: 3HO-MJ6132TY - SIERRA DE PANELES MANUAL
| Table Guide Length*Width | 3200mm*375mm(Optional) |
| Max. Cutting Height at 90° | 80mm |
| Main Spindle Diameter | 30mm |
| Main Saw Diameter | 300mm(250-300mm) |
| Main Saw Speed(r.p.m) | 4000/6000 |
| Motor Power(Main+Scoring) | 5.5kw + 1.1kw |
| Scoring Spindle Diameter | 20mm |
| Scoring Saw Diameter | 120mm |
| Scoring Saw Speed(r.p.m) | 8000 |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
EXTRACTOR CENTRIFUGO - EN LINEA
PARTE: 1AM - EXTRACTOR CENTRIFUGO - EN LINEAExtractor centrifugo en línea para acoplamiento en ducto de ventilación en salas de juntas, oficinas, baños, para transportar aire acondicionado en falsos plafones.Características:– Compatible con ductos de 4″ y 6″– Motores con valero y protección de térmica incluye clave y clavija.– Alimentación de 127 Volts.
Modelo
Potencia
WATTS
Volumen
PCM M...
-500x500.png)
AMXmachinery1
MAQUINA DE COPEADO
PARTE: 2PI-CMJ-HSK - MAQUINA DE COPEADOIs a machine designed for chip free coping or tenoning of either square or profiled parts without the need for a back-up piece or chip breaker. Two independent spindles with the tool changer is a great fit for medium to large shops that need to quick-change between multiple profiles per day.No backer board or chip breakers requiredTear out free parts every timeAccurate spindle adjustment for tool alignmentPart stays fixed while the carriage movesDual Air-L...
-500x500.png)
AMXmachinery1
ENGOMADORA CON TRANSPORTADOR
PARTE: 2DO-GS2 - ENGOMADORA CON TRANSPORTADORFeatures a mild angle iron infeed conveyor, a stainless-steel glue roller
and a stainless-steel angle iron outfeed conveyor.
The basic model is 13 inches wide, with optional widths of 20" and
30". The infeed and outfeed conveyors are both 8 feet long and are
expandable by adding 2 feet increments. The material feeding speed is set at 60
feet per minute and the reservoir can be removed for cleaning and maintenance.
One
(1) Glue Conveyor...
-500x500.png)
AMXmachinery1
ENGANCHADORA CON CONTROLADOR NC
ENGANCHADORA CON CONTROLADOR NC PARTE: 2GM-HBB-1010NCISO 9001 certified Meet OSHA and CE safety standard48” NC table back gauge with fingers Max. 16 bends per program Upto 100 Program Storage Programmable Angle/ Angle Correct NC ram height control for open hemming Hardened fingers and table Germany Rexroth hydraulic system Yaskawa Servo motors and Drives Schneider electrical components All steel construction for maximum rigidityHydraulic logic...