Identificador: 3078
Abierta
ID de articulo : # 3078 se ha agregado a su lista de deseos.
.PNG)
Descripción
PARTE: 3HO-MJ6132TY - SIERRA DE PANELES MANUAL
| Table Guide Length*Width | 3200mm*375mm(Optional) |
| Max. Cutting Height at 90° | 80mm |
| Main Spindle Diameter | 30mm |
| Main Saw Diameter | 300mm(250-300mm) |
| Main Saw Speed(r.p.m) | 4000/6000 |
| Motor Power(Main+Scoring) | 5.5kw + 1.1kw |
| Scoring Spindle Diameter | 20mm |
| Scoring Saw Diameter | 120mm |
| Scoring Saw Speed(r.p.m) | 8000 |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ENCHAPADORA DE CANTOS
PARTE: 2CK-MX350Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more. The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. User friendly controls and adjustments allow for efficient changeovers of edge tape th...
AMXmachinery1
SIERRA MULTIPLE - 1 SIERRA - 12 PULGADAS
PARTE: 2CK-C12RSHIs a single-blade ripsaw geared towards the shop looking to increase efficiency in their ripping operations but can not justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the C12RSH can produce a glue joint finish ready for panel glue-up right out of the saw.Produces a guaranteed glue joint finish to 10′, which eliminates the need to joint the material after rippingPrecision straight line feeding for parallel and...
-500x500.png)
AMXmachinery1
ENGANCHADORA CON CONTROLADOR NC
ENGANCHADORA CON CONTROLADOR NC PARTE: 2GM-HBB-1010NCISO 9001 certified Meet OSHA and CE safety standard48” NC table back gauge with fingers Max. 16 bends per program Upto 100 Program Storage Programmable Angle/ Angle Correct NC ram height control for open hemming Hardened fingers and table Germany Rexroth hydraulic system Yaskawa Servo motors and Drives Schneider electrical components All steel construction for maximum rigidityHydraulic logic...
-500x500.png)
AMXmachinery1
ENGOMADORA CON TRANSPORTADOR
PARTE: 2DO-GS2 - ENGOMADORA CON TRANSPORTADORFeatures a mild angle iron infeed conveyor, a stainless-steel glue roller
and a stainless-steel angle iron outfeed conveyor.
The basic model is 13 inches wide, with optional widths of 20" and
30". The infeed and outfeed conveyors are both 8 feet long and are
expandable by adding 2 feet increments. The material feeding speed is set at 60
feet per minute and the reservoir can be removed for cleaning and maintenance.
One
(1) Glue Conveyor...