Identificador: 319
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE # 2AZ-D45AX - SIERRA DOBLE 45 GRADOS - SIERRAS 12" DIAM
PARTE # 2AZ-D45AX14 - SIERRA DOBLE 45 GRADOS - SIERRAS 14"DIAM
Fixed Head Double Mitre Saw
Blade Capacity: 12" (14" available)
2 H.P. 1 or 3 phase
Magnetic Starter
3450 RPM
Cutting Capacity:
12": 4" X 2.375"
14": 4" X 2.5" or 2"X 6”
Blade Capacity
10" OD 254mm Saw blades not included.
12" OD 305mm optional.
14" OD 356mm optional.
Spindle & Pivot
Both mounted on pre-loaded and sealed ball bearings.
Arbor
5/8" 16mm with 2-1/4" 57mm saw collars.
Iron Castings
Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences.
Motors & Voltages
1-1/2 H.P. single phase 115/230 Volt and 3 phase 230/460 Volt, Totally Enclosed Fan Cooled Motors, 60 Hz, 3450 RPM with Dual Magnetic Starter. Consult factory for amerage load of motors.
Table Height
34-1/2" 88cm from floor.
Floor Stand
Close coupled heavy gage steel stand completely enclosed with 6" dust outlet. 1200 CFM required.
Blade Wear & Angular Adjustments
Each saw head has adjustments for blade variation. Allows for precision alignment of blades to minimize scrap. Saw heads are adjustable up to 3°, always assuring perfect mitres.
Length of Stroke Adjustment
The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, thereby saving wasted time and motion.
Production Rate
The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.
Size
Standard machine, without tables or gages; Weight 550 lbs. 250kg; 46" 117cm Wide x 22" 56cm front to back x 51-1/2" 131cm High.
Crated Size
45" 114cm Wide x 28 -1/2" 72cm front to back x 60" 152cm High.
Actuation
Pneumatic foot valve with cover.
Air Pressure
75 PSI 5.4 kg/cm2 with Air Filter/Regulator/ Lubricator; includes Auto Drain.
Air Consumption
1.0 CF per 10 strokes at 75 PSI .043 cubic meters per minute at 5.4 kg/cm2.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
COLECTOR ASERRIN 10, 20, 25 HP
PARTE # 2TA-DC-9100 – COLECTOR DE ASERRIN – MOTOR 10 HP – 8900 CFMPARTE # 2TA-DC-9200 – COLECTOR DE ASERRIN – MOTOR 20 HP – 12200 CFMPARTE # 2TA-DC-9250 – COLECTOR DE ASERRIN – MOTOR 25 HP – 14600 CFMNuevo con garantia- Heavy sheet metal frame and base.- Extra large radial-fin type steel impeller for high efficiency air flow.- Heavy duty, totally enclosed industrial motor for maximum air suction and extended service life.- Low sound levels to keep the working area quiet.SPECIFI...
AMXmachinery
SIERRA MULTIPLE FRAME SAW
2OG-PP-001 – SIERRA MULTIPLE VAIVEN – FRAME SAW – CORTE DELGADONUEVA CON GARANTIASturdy, solid cast iron base and is equipped with a 15kW (20 HP) main motor.Cuts solid wood blocks into glueable slats with minimal saw kerf waste.The machine can run products up to 250mm in height (10”).The Power Plus Frame Saw provides a high performance and quality machine for the production of veneer slats. The machine can be fitted with a custom channel system that will feed up to 5 boards simultaneousl...
AMXmachinery
PROFILE KNIFE GRINDER - RONDAMAT 960
PARTE: 12306-E - PROFILE KNIFE GRINDER - RONDAMAT 960USED - GOOD CONDITION9-3/8″ max. arbor lengthTool dia. 11-3/4″ max. to 4″ minGrinding wheel speed inverter controlledGrinding wheel speeds from 1,500 to 3,000 RPM 1.5 HP motorhydro-clamping of grinding wheel to arborSetting gauges for axial constantAxial clearance angle 0-20 degreeOn board diamond wheel dressing8-7/8″ max. 6″ min. grinding wheel dia
13-gal. coolant tank w/ 1.2 HP pump
AMXmachinery
GRABADORA LASER 60" X 36"
PARTE: 2TA-CLC6036 - GRABADORA LASER CNC 60" X 36"NUEVA CON GARANTIA59" X 35.4" GRABADORA/CORTADORA LASER- Applications for most material and many industries. Some include but not limited to wood, acrylic, leather, marble, glass, paper, rubbery, plastic, cloth, ABS and many more.- Motorized table up & down for easy adjustment. Durable and steady are key features using double guide-rails that ensure long life of motion and accuracy.- Unique optics structure of the fly ray, which has low warp wi...