Identificador: 3043
Abierta
.PNG)
Descripción
PARTE: 2DO-CFS - SIERRA TRONZADORA PARA ATAUDES
- Long part of a casket top coming out from the RF Press made of hardwood
- One (1) frame with two (2) cutting stations
- One (1) cutting station is mobile to adjust for length of casket with pneumatic cylinder and adjustable stopping position
- Each cutting stations include:
- Two (2) 5HP motors at 3500 RPM with 20'' blade mounted on a pneumatic arm
- Adjustable fence and horizontal and vertical pneumatic hold downs
- Pneumatic fixtures to adjust for casket model - similar to existing end saw machine
- Pneumatic up/down mechanism with idler roller to receive casket top from RF press at higher level than cutting position
- Powered side wheels
- Safety guards and dust collectors
- “Guillotine” type access door to casket area on pneumatic cylinders with safety switches
Powered side wheels to feed/exit casket top to/from
the cutting area with automatic positioning of the casket for the cutting cycle
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA MULTIPLE - 100 HP
PARTE: 2CK-MRS155FEATURESExtra Robust 100 HP motorGreat Cutting Thickness of 155mm (6.1″)Continuous duty 100 HP arbor motor allows deep cutting speeds of thick lumberMRS-155 has a massive cast iron base, composing the majority of total machine weight of 2700kg. This design provides incredible absorption characteristics under deep cutting, especially while performing thick lumber ripping with a multi-blade set upPrecision chain and rails (dip chain) system facilitates accurate cutting operation...
-500x500.png)
AMXmachinery1
TALADRO MULTIPLE EN LINEA
TALADRO MULTIPLE EN LINEA 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The precision ...
-500x500.png)
AMXmachinery1
ARMADORA DE PUERTAS
PARTE: 2RI-R450V - ARMADORA DE PUERTASIs designed for high and low volume production requirements. Is the smallest version of our heavy duty cabinet door clamping tables. In this system the operator is freed from the task of managing individual bar or pipe clamps, and instead, uses pneumatic clamp cylinders to apply pressure to the glue line. Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square assem...
-500x500.jpg)
AMXmachinery1
ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORA
PARTE: 2TA-WG-2404HC - ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORAFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting ...