ID: 1144
Open
Description
ELCON 320 DSX-E TO CUT THROUGHT 0-135 MM AUMINUM
A vertical panel saw can be used to cut through various materials, like wood based,plastics, composites etc.
This episode's custom built Elcon panel saw was developed to cut through aluminium tailgate / cargolift. A bar code scanner tells the machine to cut off the left and left and right side. The sawing speed is automatically adjusted to the thickness of the material, in this case up to 135mm!
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
SIERRA ESCUADRADORA - 3200 MM
PARTE: 2LO-TS-P3200MA - SIERRA ESCUADRADORA - 3200 MM NUEVA CON GARANTIAHeavy duty construction provides vibration free operation. Easy to set up and adjust.Manual raise, lower and tilt of main blade and scoring saw.Scoring unit provides clean, accurate, chip free cutting, ready for edge banding.Sealed main shaft bearings (lubricated for life) with vibration dampening system.Highly accurate, freely moving sliding table with wear resistant guide rails and rollers.Specially designed roller carria...
AMXmachinery
EXTRACTOR DE TURBINA - MOTOR 1 HP - S&P
PARTE:
AMX-10048 - EXTRACTOR DE TURBINA - MOTOR 1 HP - S&P
USADO - MUY BUENAS CONDICIONES
MARCA S&P
MODEL: CSB-1300
MOTOR 1 HP, 127/220V, 1 FASE, 60 HZ
AMPS: 17.3 / 9.5
3535 RPM
VOL. 1300 M3/H
HECHO EN MEXICO
ENTRADA: 5-1/2” DIAMETRO
SALIDA RECTANGULAR: 5” ALTO X 4” ANCHO
MEDIDAS TOTALES: 46 CM ANCHO X 38 CM FONDO X 57 CM ALTO
AMXmachinery
ESCOPLO OSCILANTE - 2 MESAS - BALESTRINI
PARTE: 12534 - ESCOPLO OSCILANTE -
2 MESAS - BALESTRINI
USADO - MUY BUENAS CONDICIONES440V, 3 FASES
AMXmachinery
LIJADORA BANDA ANCHA – SUPERIOR E INFERIOR – 52” ANCHO - COSTA
PARTE:
12137 – LIJADORA BANDA ANCHA – SUPERIOR E INFERIOR – 52” ANCHO - COSTA
USADA – BUENAS CONDICIONES
First Machine 4 Heads Bottom
1.Steel Contact Roller 42 KW
2.Rubber Contact Roller 37 KW
3.Rubber Contact Roller 27 KW
4.Rubber Contact Roller 18 KW
Panel Brush Cleaner
Second Machine 4 Heads Top
1.Steel Contact Roller 42 KW
2.Rubber Contact Roller 37 KW
3.Rubber Contact Roller 27 KW
4.Rubber Contact Roller 18 KW
5. Panel Brush C...