Identificador: 1144
Abierta
ID de articulo : # 1144 se ha agregado a su lista de deseos.
Descripción
ELCON 320 DSX-E TO CUT THROUGHT 0-135 MM AUMINUM
A vertical panel saw can be used to cut through various materials, like wood based,plastics, composites etc.
This episode's custom built Elcon panel saw was developed to cut through aluminium tailgate / cargolift. A bar code scanner tells the machine to cut off the left and left and right side. The sawing speed is automatically adjusted to the thickness of the material, in this case up to 135mm!
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CEPILLO 4 CARAS - CAPACIDAD 17.5” ANCHO
PARTE:
12332 - CEPILLO 4 CARAS - CAPACIDAD 17.5” ANCHO
USADO - MUY BUENAS CONDICIONES
Capacidad 450 mm x 200 mm
4 portaherramientas
Altura superior 200 mm
Cepilladora alta y baja 10 - 10 HP
Cepilladora verticales 7.5 - 7.5 HP
Medidas de la Maquina : Largo 2730 mm x ancho 1470 mm x
alto 1500 mm
Peso incluido el embalaje
2500 Kg
AMXmachinery
PARTE: 12565 - COLECTOR DE ASERRIN - MOTOR 10 HP - BELFAB
PARTE: 12565 - COLECTOR DE ASERRIN - MOTOR 10 HP -
BELFAB
USADO - MUY BUENAS CONDICIONES
Main Motor: 10
HP, 230/460v, 3ph
Start/Stop
Station for 230v, 3ph
Chip Collect in
Two Lower Plastic Bags
Filtration Surface (sq.ft): 331.63
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
PRENSA HIDRAULICA PARA REVESTIR SOLDADURA
PARTE: 12193 - PRENSA HIDRAULICA PARA
REVESTIR SOLDADURA
USADA – BUENAS CONDICIONES