Identificador: 1717
Abierta
ID de articulo : # 1717 se ha agregado a su lista de deseos.
Descripción
PARTE: 12351 - MOLDURADORA – 5 CABEZALES – OMIL PLM 5
USADA BUENAS CONDICIONES
ANCHO MAXIMO 160 MM
ALTO MAXIMO 90 MM
LARGO MINIMO 200 MM
CABEZALES 5500 RPM
6 MOTORES POTENCIA TOTAL 45.5 HP
HECHA EN BRASIL
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery1
SIERRA ESCUADRADORA - 3200 MM
PARTE: 2CK-P305 - SIERRA ESCUADRADORA - 3200 MMIs built for the budget conscious user that still wants precision and accuracy. The machine has a precision sliding table which runs on ball bearings and hardened steel guide strips. It is equipped with individual motors for the main saw blade (5 HP) and scoring blade (1 HP). The blade height and tilt is manually adjusted by means of individual handwheels. The angle of the blade is displayed by a linear scale for added operator convenienc...
-500x500.jpeg)
AMXmachinery1
MOLDURADORA DE 4 LADOS
PARTE: 3RE-M23U - MOLDURADORA DE 4 LADOSProfessional solution: solid wood or MDF and HDF furniture, wooden door and so onCharacteristic1.Inverter feed speed of 6~30m/min2.Individual motor to each spindle to ensure maximum power transmission3.High precision spindle units with two pairs of high precision bearings each end of the assembly4.All main spindle adjustments are carried out from outside the enclosure5.Hard chromed bed plates to minimise bed wear6.Short piece driven top feed roller unit fo...
AMXmachinery1
ALIMENTADOR - 3 RUEDAS - 1/8 HP
PARTE: 2EX-XF-M3 - ALIMENTADOR - 3 RUEDAS - 1/8 HP3 RollersVariable Speed (6.5 – 56 fpm)Forward/ReverseUniversal Stand IncludedSpecifications: Number of Rollers: 3Min Speed (ft/min): 6.5Max Speed: 56
-500x500.png)
AMXmachinery1
CENTRO DE CORTE 5 EJES
PARTE: 4ST-MV 520 - CENTRO DE CORTE 5 EJESProductivity, precision, automation.Is designed for manufacturers of timber-framed houses and TRUSS trusseswho require speed, repeatability and digital integration.5-axis technology for complex cutsThe cutting unit rotates 360° and tilts ±90°, easily performing:- Straight cuts- Angled cuts- High-precision compound cutsPerfect for beams and structural components with variable geometries.Patented handling for maximum speedThe independent dual-belt clamp...