• Inicio
  • Comprar
English Spanish
AMX Machinery S. de RL. MI.
Welcome, Invitado
Mi cuenta

Sign In

Forgot username o forgot password?
No Account? Create one.
0
Your shopping cart is empty.
  • Inicio
  • Maquinaria para Carpinterias y Gabinetes
  • Maquinaria para Madera y Aserraderos
  • Maquinaria para Tarimas y Pallets
  • Maquinaria para Chapas Naturales
  • Maquinaria para Palos Redondos
  • Colectores de Polvo y Aserrin
  • Herramientas de Corte para Madera
  • Maquinaria para Madera Molduras Pisos y Tableros
  • Prensas Hidraulicas y Calientes
  • Hornos y Secadores de Madera
  • Maquinaria para Reciclado y Biomasa
  • Maquinaria para Cubiertas de Cocinas y Baños
  • Laminadoras y Postformadoras para Molduras y Tableros
  • Casetas y Lineas de Pintura para Madera y Muebles
  • Maquinaria para Metal
  • Compresores de Aire
  • Hornos para Ceramica Vidrio y Acero
  • Manejo de Materiales
  • Refacciones para Maquinaria
  • Materiales y Consumibles
  • Herramientas Electrica Neumatica y Manual
  • Lineas de Maquinaria
  • Tienda Online
  • Maquinaria Usada
  • Otras Categorias
  • Todas las Categorías
AMX Machinery S. de RL. MI.
0
Your shopping cart is empty.
  • Welcome, Invitado
    English Spanish
  • Inicio
  • Comprar
  • Wish List
  • Registrarse / Sign In
  1. Inicio
  2. Maquinaria para Metal
  3. Tornos Manuales
Identificador: 2590 Abierta
TORNO 16'' X 40''
TORNO 16'' X 40''
TORNO 16'' X 40''
TORNO 16'' X 40''
TORNO 16'' X 40''

TORNO 16'' X 40''

AMXmachinery1

Contacte al Vendedor
Descripción
PARTE: 2GM-GML-1640HD - TORNO 16'' X 40''                                


  • ISO 9001 certified
  • Large spindle bore 2-1/16”
  • Heavy Duty spindle D1-6
  • One-piece solid cast iron machine base
  • Heavy Duty guideway width 10-1/4”
  • Heavy Duty main motor 6 HP
  • 16 spindle speeds from 45-1,800 rpm, speeds: 45/70/90/108/140/165/215/255/330/385/510/585/770/900/1170/1800rpm
  • 45 kinds of inch threads, and 39 kinds of metric threads
  • Threading and feeding rate change without changing gears
  • Spindle is balanced, hardened and precision ground
  • Spindle is supported at 3-point by high precision bearings  
  • All gears and shafts are hardened and precision ground
  • Guideways induction hardened and precision ground
  • Automatic lubrication system in headstock and feed box
  • SINO DRO (installed)
  • Taper turning attachment (installed)
  • 8” 3-jaw chuck with one set of reversible jaws
  • 10” 4-jaw chuck
  • 12” Face plate
  • 5 1/2” large steady rest with roller jaws (bearings)
  • Oil pump on Apron for all guideways and leadscrews
  • 2” follow rest with roller jaws (bearings)
  • Removeable gap
  • 4-way tools post
  • Foot brake
  • Halogen Work light and coolant system
  • Full length splash guard 
  • (2) dead centers and (1) reducing sleeve MT6/MT4
  • Thread chasing dial
  • Tool box and leveling pads

Max. swing over bed

16-1/16"

Max. length of workpiece

40"

Max. swing over cross slide

10-1/4"

Max. Swing in gap

23-1/4"

Width of Bed

10-1/4"

Effective length in gap to spindle

8-1/2"

Effective length in gap to chuck jaws

3-1/2"

Spindle bore

2-1/16" D1-6

Taper of spindle center

M.T. #6 (MT6/MT4 sleeve)

Spindle speeds

45-1,800 rpm / 16 steps

Longitudinal feeds

0.0018-0.07 IPR, 42 kinds

Cross feeds

0.0009-0.03 IPR, 42 kinds

Inch threads

70-2 TPI, 45 kinds

Metric threads

0.2-14 mm , 39 kinds

Diametral Pitch threads

8-40 DP , 21 kinds

Module threads

0.3-3.6 mm, 18 kinds

Max. travel of top slide

4-1/4"

Max. travel of cross slide

8-1/2"

Spindle length w/o chuck

Leadscrew length X TPI

20-1/2"

1-1/4" x 4 TPI

Diameter of tailstock quill

2-1/16"

Max. travel of tailstock quill

5"

Taper of tailstock quill center

MT4

Main motor:

 

 

Note:

6 HP, 3 Phase, 20AMP

Prewired: 220VAC

 

30AMP Breaker Needed ( 20A x 1.5 )

Coolant pump:

1/8 HP, 220V, 3 Phase

Oil for Headstock / Gear box / Apron

#30 weight machine oil

Eg: Texaco regal R&O 100, 3 Gal.

Net weight:

4,150 lbs.

Overall Dimensions (LxWxH):

Shipping Dimensions:

79" x 38" x 56"

80”x36”x70”

Pago y Devoluciones
Forma de pago
N/A
Publicar mensaje
Ingresar to ask the seller a question.
ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORA
AMXmachinery1
ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORA
PARTE: 2LO-WG-2404HC  -  ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORAFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting ...
RECORTADORA - PARA ENCHAPADORA DE CANTOS
AMXmachinery1
RECORTADORA - PARA ENCHAPADORA DE CANTOS
PARTE: 2MK-RBB.4G - RECORTADORA - PARA ENCHAPADORA DE CANTOSPerform trimming, scraping and polishing of edge bands applied to MDF sheets and similar, providing a perfect finish to your projects. Performs these operations on edge bands with a thickness of up to 1 mm, and sheets with a height of up to 70 mm. It has an advance that will help and guarantee greater ergonomics during operations. Its adjustment and operation is very simple:First, you choose the plate you want to finish. After that, adj...
CEPILLO 4 CARAS - 25" ANCHO
AMXmachinery1
CEPILLO 4 CARAS - 25" ANCHO
PARTE: 2EX-SXP-425 - CEPILLO 4 CARAS - 25" ANCHODetails: 50 HP Top, 40HP Bottom15 HP side Motor6000 RPM Cutter headsAir Loaded Sectional feed rollerDigital PLC Thickness ControllerLong infeed and outfeed tablesMoulder Style Side headsCarden Shaft drive SystemSegmented Roller Feed SystemSpecifications: Horsepower: 50/40/15/15HPWidth: 25"Top Motor: 50 HPBottom Motor: 40 HPLeft Motor: 15 HPRight Motor: 15 HPElevation Motor: 2 HPFeed Motor: 5 HPStandard Max Thickness 8"Max Available Thickness: 12...
COLECTOR DE POLVOS MODULAR - 5 HP
AMXmachinery1
COLECTOR DE POLVOS MODULAR - 5 HP
PARTE: 2EX- DC-3050  - COLECTOR DE POLVOS MODULAR - 5 HPComes in three phase models. The three-phase dust collector has 17 amps at 220 volts. Modular ring design enables increased storage and filter capacity. Magnetic starter included. Please refer to the comparison chart below for specifications on all modular dust collector models. 
Ver todos

Contactenos

  • Contactenos
  • Inscribase a Boletin!

Productos / Servicios

  • Productos / Servicios
  • Venda su Maquinaria
  • Referencias

Terminos

  • Politica de Privacidad
  • Terminos / Condiciones
Subscribe to Newsletter
AMX Machinery S. de RL. MI.

©2024 AMX Machinery. All rights reserved.