Identificador: 2554
Abierta
.PNG)
Descripción
TORNO 32'' X 160'' 15 HP PARTE: 2GM-GML-32160
Heavy Duty Precision Gap Bed Lathe 32” x 160” 4-1/8” bore, 15HP Motor.
- ISO 9001 certified
- Large spindle bore 4-1/8”
- 4-way rapid traverse on Longitudinal and cross ways
- All dual inch/metric dials.
- Solid cast iron machine base
- Heavy Duty main motor 15 HP
- 12 spindle speeds from 25-1,600 rpm
- 54 kinds of inch threads and metric threads
- Threading and feeding rate change by levers
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- Tools box with leveling pads
Max. swing over bed | 32” |
Max. length of workpiece | 160” |
Max. swing over cross slide | 26-7/16” |
Max. Swing in gap | 46-1/2” |
Width of Bed | 16” |
Effective length in gap to spindle | 10” |
Effective length in gap to chuck jaws | 7” |
Spindle bore | 4-1/8” , D1-8 |
Taper of spindle center | MT#5 with1:20 reducing sleeve |
Spindle speeds | 25-1,600 rpm / 12 steps |
Longitudinal feeds | 0.0016-0.055 IPR, 60 kinds |
Cross feeds | 0.0008-0.027 IPR, 60 kinds |
Inch threads | 80-7/16”TPI, 54kinds |
Metric threads | 0.45-120 mm , 54 kinds |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
PARTE: 2CK-MX550AU - ENCHAPADORA DE CANTOS - PORTATIL
PARTE: 2CK-MX550AU - ENCHAPADORA DE CANTOS - PORTATIL Is a versatile portable solution for the hobbyist or industrial user. It is capable of edgebanding radius or straight workpieces and can be operated as a handheld unit (standard) or a stationary system with the optional table accessory. The edgebander is equipped with a glue pot which uses granulated hot melt glue with an operating temperature range from 120oC to 200oC (250oF to 390oF). Th...
-500x500.png)
AMXmachinery1
MESA CORRIENTE DESCENDENTE - 1 HP
MESA CORRIENTE DESCENDENTE - 1 HP * 2CL-FT2200Is ergonomic, energy efficient, and easy to maintain. Rubber anti-slip rings and removable location stops ensure the material does not move during the sanding process, and the dual filters safely trap sawdust particles. Rear suction boards and side deflector plates are removable for sanding larger surface materials. Is perfect for light to medium duty woodworking applications such as sanding and finishing.84” x 24” table surfacePerfect soluti...
AMXmachinery1
SIERRA DOBLE - 45 GRADOS - 20 PULGADAS
PARTE: 2CK-PCM508Is a precision pneumatic saw designed for cutting miters up to 60o in either direction. The saw is automatically cycled pneumatically and activated by a foot switch to allow for fast positioning of the workpiece. Capable of production cutting with up to 40 cuts per minute. The cutting speed is adjustable to ensure the optimum finish result on your workpiece no matter the species or size. The rotary table runs on ball bearings to ensure effortless rotation of the blade ...
-500x500.png)
AMXmachinery1
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL Entry level with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end trimming, flush tri...