Identificador: 2554
Abierta
ID de articulo : # 2554 se ha agregado a su lista de deseos.
.PNG)
Descripción
PARTE: 2GM-GML-32160 - TORNO 32'' X 160'' 15 HP
Heavy Duty Precision Gap Bed Lathe 32” x 160” 4-1/8” bore, 15HP Motor.
- ISO 9001 certified
- Large spindle bore 4-1/8”
- 4-way rapid traverse on Longitudinal and cross ways
- All dual inch/metric dials.
- Solid cast iron machine base
- Heavy Duty main motor 15 HP
- 12 spindle speeds from 25-1,600 rpm
- 54 kinds of inch threads and metric threads
- Threading and feeding rate change by levers
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- Tools box with leveling pads
Max. swing over bed | 32” |
Max. length of workpiece | 160” |
Max. swing over cross slide | 26-7/16” |
Max. Swing in gap | 46-1/2” |
Width of Bed | 16” |
Effective length in gap to spindle | 10” |
Effective length in gap to chuck jaws | 7” |
Spindle bore | 4-1/8” , D1-8 |
Taper of spindle center | MT#5 with1:20 reducing sleeve |
Spindle speeds | 25-1,600 rpm / 12 steps |
Longitudinal feeds | 0.0016-0.055 IPR, 60 kinds |
Cross feeds | 0.0008-0.027 IPR, 60 kinds |
Inch threads | 80-7/16”TPI, 54kinds |
Metric threads | 0.45-120 mm , 54 kinds |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL - 10' X 14 GA - CNC
PARTE: 2GM-EFM-1014CNC - DOBLADORA DE METAL - 10' X 14 GA - CNC CNC folding machine with an Italian ESA CNC control. 11" touch screen straight brake. 2000 jobs memory capacity.ISO 9001 certifiedDesigned in US and Taiwan quality MachineMeet OSHA and CE safety standardESA CNC control, made in Italy16” large Digital glass touch screenMax. 99 bends per programUpto 2000 Programs StorageProfiles library with graphicsProgrammable Radius BendProgramma...
-500x500.png)
AMXmachinery1
ENCHAPADORA DE CANTOS - AIRE CALIENTE
PARTE: 2SS-EZ 60HA - ENCHAPADORA DE CANTOS - AIRE CALIENTEOur hot air edgebander applies your preferred choice of preglued edgebanding. Reduce the amount of panels discarded due to unsatisfactory edge banding installation. It features electronic variable speed control, digital temperature control, electromagnetic end cutters, an accutrim edge trim system and more. The innovative design of this American-Made machine makes it easy to use and provides a very dependable edgebanding solution. This ma...
-500x500.png)
AMXmachinery1
SISTEMA DE ENTRADA PARA SIERRAS MULTIPLES - ALIMENTADOR
PARTE: 2LE-005 - SISTEMA DE ENTRADA PARA SIERRAS MULTIPLES - ALIMENTADORIs a low-cost solution to feeding boards into your fixed or movable saw blade ripsaw.A powered movable fence on the infeed allows you to position the board exactly where you want to rip it. This reduces the edging size.Stock is manually placed on the infeed roll case. After a fence position has been selected the operator releases the piece and it is automatically fed into the ripsaw.The infeed table can run stock that is...
AMXmachinery1
EXTRACTOR DE POLVOS - FILTRO - 2 SECCIONES
PARTE: 2EX-DCF-218 - EXTRACTOR DE POLVOS - FILTRO - 2 SECCIONESTyphoon offers 2 sections baghouse sock filter in open or enclosed models. Both of these models have 9 1-micron, 6-inch filter socks per section with a 16 inch inlet port to fit the magnum series dust collectors. The open model should not be used in direct exposure of rain or water, while the enclosed model is for outdoor use.