Identificador: 2443
Abierta
ID de articulo : # 2443 se ha agregado a su lista de deseos.
PARTE: 12561 - REASERRADORA HORIZONTAL - 1 BANDA - CON REGRESADOR - GRIZZLY
AMXmachinery
Descripción
PARTE: 12561 - REASERRADORA HORIZONTAL - 1 BANDA - CON REGRESADOR - GRIZZLY
Usada - Buenas Condiciones
Main motor: 25HP, 220V/440V* (prewired for 220V), 3-phase
Elevation motor: 1/2 HP
Hydraulic pressure: 1000 PSI
Belt Powered Hydraulic Pump - Main Saw Motor - 25HP
Maximum cutting capacity: 10" x 16"
Distance from blade to conveyor table: 1/4"–10"
Feed speed: 0–61 FPM
Saw blade size: 180" L x 1" W
Saw blade speed: 7300 FPM
Floor to table height: 40"
Infeed table: 106" L x 16" W
Infeed belt: 215-3/4" L x 15-1/4" W
Hydraulic Infeed Conveyor Motor
Return table: 107-1/2" L x 18-1/2" W
Return belt: 215-3/4" L x 7-1/4" W
Hydraulic Return Conveyor Motor
Wheel size: 28" dia. x 7/8" W
Dust port size: 2 x 4"
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2EV-6100 - POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100
PARTE: 2EV-6100 - POSTFORMADORA CONTINUA 2 LADOS - EVANS 6100220 Volt, 3 Ph., 60 Hz., or 380 Volt, 3 Ph., 50 Hz.17 kw (no air required) Standard work height 37”.Standard Features:90 and 180 degree setupQuick-change 90 and 180 degree roller assembles each side.Maximum material width 48"Heaters: Infrared radiant panel (instant on / off)Foot print: 107”L X 72”W X 44”H, Work height 37”Maximum Feed rate 10 feet per minute.Feed motor: ½ hp variable speed DC drive.Crated weight 2400 LBS. Shi...
AMXmachinery
PARTE: 12281 – AFILADORA DE CUCHILLAS – WEINIG RONDAMAT 930
PARTE: 12281 – AFILADORA DE CUCHILLAS
– WEINIG RONDAMAT 930
USADA – BUENAS CONDICIONES
AMXmachinery
PARTE: 12610 - SIERRA RAJADORA – 1 SIERRA – NORTHTECH
PARTE: 12610 - SIERRA RAJADORA – 1 SIERRA – NORTHTECHUsada – Buenas condicionesMotor principal 15 HP, 460/60/3 electricsModelo: SLR-12SCMfg. 2017
AMXmachinery
MOLDURADORA 5 CABEZALES
PARTE # 12WG-UNIMAT 217 - MOLDURADORA - 5 CABEZALESMOLDURADORA AUTOMATICA5 CABEZALESCARACTERISTICAS GENERALES:KW (HP) rpm Tool cutting circle1 - 7,5 (10) with Electronic Brake 6000 5“ – 5-11/16“2 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“3 - Joint Motor together with Right 6000 5“ – 7-7/8“4 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“5 - 7.5 (10) with Electronic Brake 6000 5“ – 7-7/8“ Tool arrangement BRLTBWorking width 3/4“ – 9“Working height 5/16�...