ID: 1717
Open
Description
PARTE: 12351 - MOLDURADORA – 5 CABEZALES – OMIL PLM 5
USADA BUENAS CONDICIONES
ANCHO MAXIMO 160 MM
ALTO MAXIMO 90 MM
LARGO MINIMO 200 MM
CABEZALES 5500 RPM
6 MOTORES POTENCIA TOTAL 45.5 HP
HECHA EN BRASIL
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery1
TALADRO - BISAGRADORA - 1HP
PARTE: 2MK-LBP.13 - TALADRO - BISAGRADORA - 1HPHas a lubricated aluminum head, heat treated steel gears, 1 HP motor, 13 stainless-steel spindles, extendable fence guide up to 89” and 2 fence stops.Technical InformationMotor1HP 110V 1 Phase 10A 60 HZPrewired110 V, Single – Phase – 10 A / 5 ATable Size31"x 15 1/2"Spindle Speed3.450 RPMFence Stops2Expandable Fence GuideMax 89"OperationPneumaticFloor to Table Height34"Max. Depth of Stroke2.5"Length of Fence61.5-5-91.5"Number of Spindles13 (6 L...
-500x500.png)
AMXmachinery1
ESPIGADORA HORIZONTAL
PARTE: 2PI-OTF - ESPIGADORA HORIZONTALIt is designed to belt position the workpiece, bore a hole, then advance the workpiece to the correct location for the inserter, inject glue or water (for pre glued dowels), and fire the dowel into the hole. A part is placed into the work zone referencing the back fence and advancing the part onto the belt. The belt system allows constant part feeding into the machine.Elimination of complicated machine setupQuick, accurate assemblyGain production times on C...
AMXmachinery1
MOLDURADORA - 4 CABEZALES - 8” ANCHO - LEADERMAC LMC 418S SMARTMAC
PARTE: 2CK- LMC-418S - MOLDURADORA - 4 CABEZALES - 8” ANCHO - LEADERMAC LMC 418S SMARTMAC
SPECIFICATIONS
Thickness of material
¼” to 5”
Width of material
.6” to 8”
Min lenght of material
8” (butt fed)
Feed speeds to
20 – 85 FPM (6 – 25 MPM)
Axial Adjust (side heads)
.8” (20mm)
Axial Adjust
(top/b...
-500x500.png)
AMXmachinery1
ENLAZADORA DE CAJONES MANUAL
ENLAZADORA DE CAJONES MANUAL 2CK-JDT65Produces both the pin and tail of the dovetail simultaneously. All four sides of the drawer can be loaded into the machine for optimum production capacity. The operator controls the dovetail unit by following a simple template allowing for ease of operation and quality joints. Equipped with a choice of four pitch templates for varying types of dovetail joints.Ideal for drawer production and furniture parts which require high quality doveta...