Identificador: 1738
Abierta
ID de articulo : # 1738 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-P815HV
Has a solid steel helical cutterhead with two-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting the table height is quick, accurate, and easy. The frame is made from heavy cast iron with known vibration damping resulting in long bearing life and superior cut quality. The planer’s segmented, serrated infeed roll & segmented pressure shoe ensures material is held firmly during the feeding and planing process The planer has a quick-set micro-adjustable lever that easily raises and lowers the table rollers to aid in the feeding of difficult to feel wood. The industry standard 30×12×1.5mm carbide insert knives are positioned by two pins and held buy a gib and screw which do not require any special tools to set the height. The knives have a slight bevel in the corners which provide for a superior finish without any stepping between the knives. In addition, the knives sit vertically into the head which produces a proper cutting angle and gulley to allow for superior cutting depth.
- Spiral insert knife cutterhead with superior cut quality and maximum depth of cut
- Two-sided solid carbide inserts are easily changed while providing optimum wear life
- Heavy-duty cast iron machine frame ensures long machine life, optimum cut quality with its superior vibrating damping properties
- Digital thickness control for accurate automatic adjustment of the table position
KEY ADVANTAGES
- PLC digital control for auto-thickness setting
- Sectional infeed roller and sectional chip breaker
- Anti-kickback safety fingers for safe operation
- Variable speed drive for optimum finish results according to the planing depth and material being planed.
- Quick-set table roll adjustment to aid in feeding difficult to feel material
- Steel spiral cutterhead with carbide inserts – 6 rows 120 inserts 30 x 12 x 1.5 mmCutters mounted on angle for ‘shear’ cut
- Exhaust hood with 6″ outlet
- Flip open upper hood for easy and convenient access to change the knives on the cutterhead
- Safety limit switch on the cover will not allow the operator to run the machine with the hood open.
- 4 table raising jack screws
|
Maximum planing width |
32” |
|
Maximum planing thickness |
11-13/16″ |
|
Minimum planning thickness |
3/8” |
|
Max. depth of cut |
5/16″ |
|
Minimum length |
8-3/4″ |
|
Table size |
34 ¼” x 34 ¼” |
|
Feed speed |
20-39 FPM Variable |
|
Main motor |
15 HP |
|
Feed motor |
2 HP |
|
Power rise and fall of table |
½ HP |
|
Dust hood |
(1) 6” |
|
Shipping weight |
2450 lbs |
|
Shipping dimensions |
66” x 44” x 53” |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
TORNO 26 X 80''
TORNO 26 X 80'' PARTE: 2GM-268026” x 80”, 4-1/8” bore, 10HPISO 9001 certifiedLarge spindle bore 4-1/8”Heavy Duty spindle D1-8Heavy Duty guideway width 16”Heavy Duty main motor 10HP4-Way Rapid Traverse16 spindle speeds from 25-1,600 rpm, 16 speeds54 kinds of inch threads, and 54 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced, hardened and precision groundSpindle is supported at 3-point by h...
AMXmachinery1
SIERRA CINTA - REASERRADORA - 24 PULGADAS
PARTE: 2CK-HB600AIs heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes the bandsaw unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 5HP motor allowing you to make your cuts with ease. This bandsaw delivers high accuracy for maximum production along with a simple design that assures minimum maintenanc...
AMXmachinery1
ALIMENTADOR - VELOCIDAD VARIABLE - 7 RUEDAS - PIEZAS CORTAS
PARTE: 2CK-DC70For woodworkers looking for the capability of feeding smaller parts that tend to wobble with standard 3 & 4-wheel power feeders. It is ideal for automatically feeding cabinet door parts, furniture parts, and more to a shaper.Ideal for feeding of short material7-rolls at 2.36” (60mm) which are closely coupled with a center to center distance of 2.43” (61.7mm)Universal stand allows the operator to change the feeder for vertical to horizontal feeding direction or angles as desi...
AMXmachinery1
SIERRA CINTA - VERTICAL 2 EN 1
PARTE: 2CK-HB950AIs a heavy duty 37” bandsaw that is built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes the bandsaw unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 10HP motor allowing you to make your cuts with ease. With a large cutting height capacity under the guide of up to 22” it can also be ideal for cut...