Identificador: 1927
Abierta
ID de articulo : # 1927 se ha agregado a su lista de deseos.
Descripción
PARTE: 4GR-GAZ62 - ASTILLADORA PARA MADERA - 15, 20, 25 HP
NUEVA CON GARANTIA
Valuable substance shredders shred materials such as wood, cardboard, plastic and many others economically and effectively.
Can be adjusted according to customer specific requirements for throughput volume, material to be processed, etc.
Compact and designed for high performance.
Details:
Profile rotor with welded knife carriers
Transmission and motor
Hydraulics
Screen basket
Switching cabinet / SPS control
Protected rotor bearing
Technical data:
GAZ 62
Feed opening (mm): 600 x 800
Hopper capacity (cbm): 0,6 m³
Throughput: Material and screen dependent
Rotor-Ø (mm): 252
Rotorlength (mm): 600
Rotor speed (rpm): 60 - 100
Power required (kW): 11/15/18,5
Tools: 14 knives
Screen perforation (mm): 10 - 40
Suction piece-Ø (mm): 160 mm
Air speed (m/sec.): 28
Weight (approx. kg): 1.300
Function
Material is fed through the hopper in front of a hydraulically operated drawer, which pushes the material load-controlled onto the turning rotor. The material is shredded between the rotor knives and a fixed counterknife.
The drawer has stripping bars that prevent material from entering between the drawer and machine housing. The screen hole with different perforation diameters determines the size of clippings or shavings. Produced shavings can be removed from the machine with the suction device or spiral conveyor. Once the material is shredded, the machine will automatically shut off.
PLC option for fully automated operation (upon request)
Special designs upon request.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ASTILLADORA – 30 HP – ABERTURA 60” X 60” APROX – SUDDRETH
PARTE: 12100 – ASTILLADORA – 30 HP – ABERTURA 60” X 60” APROX – SUDDRETHEn buenas condiciones30 HP Baldor rotor motor30" long rotor30" x 32" ram opening60'' x 60'' approx. hopper opening5 HP hydraulic ram motor1/2" screen openings, (needs repair)Weighs approx. 5,000 lbs
AMXmachinery
PARTE: 12305 - CABEZALES PARA MOLDURADORA - LARGO 5” - FLECHA 1-13/16" - FLECHA 2-1/8"
PARTE: 12305 -
CABEZALES PARA MOLDURADORA - LARGO 5” - FLECHA 1-13/16" - FLECHA 2-1/8"SIN BUJE FLECHA 2-1/8"
USADOS - MUY BUENAS CONDICIONES
North American
Gladu hydro-lock
6 alas
20 grados
Diámetro interior - Flecha: 1-13/16"
Diámetro exterior: 6” (150 mm)
Largo 5” (130 mm)
AMXmachinery
SIERRA ESCUADRADORA 1600 MM
PARTE # 2TA-TS-P1600MA - SIERRA ESCUADRADORA - 1600 MMHeavy duty construction provides vibration free operation. Easy to set up and adjust.Manual raise, lower and tilt of main blade and scoring saw.Scoring unit provides clean, accurate, chip free cutting, ready for edge banding.Sealed main shaft bearings (lubricated for life) with vibration dampening system.Highly accurate, freely moving sliding table with wear resistant guide rails and rollers.Specially designed roller carriage, utilizing alumi...
-500x500.jpeg)
AMXmachinery
BASTONERA 4" - 6"
PARTE # 1N-BTA-006 – BASTONERA – CAPACIDAD 4” - 6” DIAMETRONueva con garantiaMotor principal: 10 HP, 220V, 60 Hz, 3 fasesMotor alimentador: 2 HP, 220V, 60 Hz, 3 fases, A 4,500 RPMVelocidad alimentación: Variable, hasta 12 metros por minutoLa maquina incluye cabezalLa maquina es nueva e incluye garantía de 6 meses en partes mecánicasLos dados para las diferentes medidas se venden por separadoNueva con garantía de 6 meses en partes mecánicasIncluye 1 juego de cuchillas de 2 navaja...