SOLDADORA DE MADERA - ALTA FRECUENCIA

AMXmachinery

Contacte al Vendedor

Descripción

PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIA

Nuevo con garantía

Features:

Weight	150 lbs
Dimensions	66 × 43 × 44 cm
Supply	240 volt / 50hz (standard 13-amp 3-pin plug)
Generator frequency	Nominal 27.2 Mhz
Curing speed	3 – 10 seconds per weld
Penetration	50mm effective
Output	0.5 – 0.6 amps at 2400 volts (internal HT) on load
Finish	Hardwearing powder coated finish
Electrical Safety	Cabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp panel-mounted fuse for protection.
Hand gun specification	Lightweight, easy to use hand gun. Incorporates on/off trigger, thumb-operated fine tuning control and R.F. power indicator meter. Supplied with 2 sets of electrodes.
Servicing and maintainance	A comprehensive range of spares are available and can usually be delivered next day. Repairs can be carried out within 1 – 2 days.
Warranty	All new machines are covered by a standard 12-month warranty from the date of purchase.

Pago y Devoluciones

Forma de pago: Transferencia/Deposito Bancario

Publicar mensaje

Ingresar to ask the seller a question.

AMXmachinery

PART: 12308 - ALPINE AUGSBURG MILL - 100 HP

PART: 12308 - ALPINE AUGSBURG MILL - 100 HP USED - GOOD CONDITIONS NO MOTORS INCLUDED, ONLY THE MILLSVideo1: https://vimeo.com/774527761

AMXmachinery

RODILLOS PARA MAQUINAS METAL, MADERA, ETC.

PARTE: 2WR-001 - RODILLOS PARA MAQUINAS METAL, MADERA, ETC. Rodillos para máquinas para metal, madera, etc. Envíenos las medidas y especificaciones que necesita.

AMXmachinery

PARTE: 2PR-500 - ABANICO DE TECHO INDUSTRIAL - DIAMETRO 381 CM

PARTE: 2PR-500 - ABANICO DE TECHO INDUSTRIAL - DIAMETRO 381 CM Nuevo con garantía~ Input: Single Phase 220V @ 10 Amps OR Three Phase 230V @ 5 Amps ~ Speed control via VFD which also converts incoming power to 3 phase for the motor (This allows us to use 3 phase Inverters as well if needed) ~ 12.5’ Diameter @ 100 RPM ~ 80-120’ Diameter cooling coverage ~ The industries shortest ceiling drop @ 25” utilizes a horizontally mounted motor to save precious ceiling he...

AMXmachinery

OPTI-CONTROL - WEINIG - OCMS

PARTE: 12382 - OPTI-CONTROL - WEINIG - OCMS USADA - BUENAS CONDICIONESElectronic Measuring and Indicating SystemMaximum Measuring Width: 13"Maximum Tool Diameter: 11-3/4"Electronic measuring via electronic digital readouts for radial and axial measurementsWired 110V Single Phase Year: 2003

Ver todos