ID: 266
Open
Description
PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIA
Nuevo con garantía
Features:
Weight | 150 lbs |
Dimensions | 66 × 43 × 44 cm |
Supply | 240 volt / 50hz (standard 13-amp 3-pin plug) |
Generator frequency | Nominal 27.2 Mhz |
Curing speed | 3 – 10 seconds per weld |
Penetration | 50mm effective |
Output | 0.5 – 0.6 amps at 2400 volts (internal HT) on load |
Finish | Hardwearing powder coated finish |
Electrical Safety | Cabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp panel-mounted fuse for protection. |
Hand gun specification | Lightweight, easy to use hand gun. Incorporates on/off trigger, thumb-operated fine tuning control and R.F. power indicator meter. Supplied with 2 sets of electrodes. |
Servicing and maintainance | A comprehensive range of spares are available and can usually be delivered next day. Repairs can be carried out within 1 – 2 days. |
Warranty | All new machines are covered by a standard 12-month warranty from the date of purchase. |
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
SIERRA DIMENSIONADORA - RAYCO
PARTE: 11884 – SIERRA DIMENSIONADORA - RAYCO
UsadaMedidas de envío quitando las 2 mesas laterales: 490 cm largo x
120 cm ancho x 160 cm alto, 2000 kg
AMXmachinery
LIJADORA DE BASTONES – CRITZ
PARTE: 12216 – LIJADORA DE BASTONES
– CRITZ
USADA
– BUENAS CONDICIONES
6”
WIDE SANDING BELT
3
HP, 230/460V, 3 PHASE MOTOR
BICYCLE
TIRE TYPE FEED ROLLER ASSEMBLY (TILTING)
1/3
HP, 230/460V, 3 PHASE
AMXmachinery
SIERRA CINTA – VOLANTES 36” – 20 HP - CON ALIMENTADOR – STENNER
PARTE: 12227 – SIERRA CINTA – VOLANTES 36” – 20 HP - CON
ALIMENTADOR – STENNER
USADA – MUY BUENAS CONDICIONES
Wheel
Diameter: 36"
Max.
Bandsaw Width: 100mm
Maximum
Depth of Cut: 370mm
Saw
Motor: 20 HP, 230/460v, 3ph
Feed
Motor: 0.55 HP, 230/460v, 3ph
Feed
Speeds: 7.5, 15, 22.5, and 30 m/min (Need to Change Belt)
Table Size: 31" x 37"
AMXmachinery
ASTILLADORA PARA MADERA - DOBLE - DUAL
PARTE: 2SB-FGZ-240-40 - ASTILLADORA PARA MADERA – DOBLE - DUAL - 75 & 60 HP- MEJOR CALIDAD, PARA USO RUDO INDUSTRIAL CONTINUO- MOTORES TEFC, 3/60/460/1800 CONECCION DIRECTA- 2 SCREENS INCLUIDAS - ROTOR DE USO RUDO Y BALANCEADO MATERIAL A PROCESAR:- DESPERDICIO DE CEPILLOS, ASTILLAS, ASERRADEROS, TROCERIA, ETC. PRODUCTO FINAL:- PELLETS, BRIQUETTES, COMBUSTIBLE PARA BOILERS, BIODIESEL, ESTABLOS PARA ANIMALES, ETC. - DISPONIBLE CON UNA VARIEDAD DE TAMANOS DE SCREENS DESDE .020" A 3"- VARIED...