Identificador: 266
Abierta
Descripción
PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIA
Nuevo con garantía
Features:
Weight | 150 lbs |
Dimensions | 66 × 43 × 44 cm |
Supply | 240 volt / 50hz (standard 13-amp 3-pin plug) |
Generator frequency | Nominal 27.2 Mhz |
Curing speed | 3 – 10 seconds per weld |
Penetration | 50mm effective |
Output | 0.5 – 0.6 amps at 2400 volts (internal HT) on load |
Finish | Hardwearing powder coated finish |
Electrical Safety | Cabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp panel-mounted fuse for protection. |
Hand gun specification | Lightweight, easy to use hand gun. Incorporates on/off trigger, thumb-operated fine tuning control and R.F. power indicator meter. Supplied with 2 sets of electrodes. |
Servicing and maintainance | A comprehensive range of spares are available and can usually be delivered next day. Repairs can be carried out within 1 – 2 days. |
Warranty | All new machines are covered by a standard 12-month warranty from the date of purchase. |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
REASERRADORA - 4 BANDAS - BAKER BX
PARTE: 12560
- REASERRADORA - 4 BANDAS - BAKER BX
Usada - Buenas Condiciones12" CapacityApprox. 12” wide x 28’ long rubber feed belt 12” x 12” max material capacity(4) inline bandsaw head units28” diameter bandsaw wheels14½” x 1” x .035 blade capacity(4) 30HP, 230/460v, 3PH motorsHold down roller armOperator push button control pedestal
AMXmachinery
TRITURADORAS DE MINERAL - MOLINO ALPINE AUGSBURG - 150 HP
PARTE: 12308 - TRITURADORA DE
MINERAL - MOLINO ALPINE AUGSBURG - 150 HP
USADA - BUENAS CONDICIONES
NO TIENEN MOTORES ACTUALMENTE, PERO LLEVAN LOS SIGUIENTES
MOTORES
MAQUINA DE 150 HP
MOTOR PRINCIPAL: 150 HP
MOTOR SECUNDARIO: 50 HPVideo1: https://vimeo.com/774524950
Video2: https://vimeo.com/774526264
-500x500.jpg)
AMXmachinery
ESPIGADORA DOBLE DE CADENA - (2) MAQUINAS - CAP. 54” ANCHO Y 110” LARGO
PARTE: 11754 - ESPIGADORA DOBLE DE CADENA - (2)
MAQUINAS - CAP. 54” ANCHO Y 110” LARGO
4 - SIERRAS DOBLES. SIERRAS MARCA IND. G.H. PARA
ESCUADRAR MATERIAL HASTA DE 54” DE ANCHO Y 110” DE LARGO, QUIPADA CON 4 SIERRAS
DE 60 DIENTES EN 1/16 DE GROSOR ACCIONADA POR UNA BANDA, ROLES Y MICRO PARA
DIMENSIONAR Y CORTAR.
AMXmachinery
SIERRA CINTA – CAPACIDAD 28”
PARTE: 2AA-8-MARK-II - SIERRA CINTA
– CAPACIDAD 28” – AMADA
NUEVA CON GARANTIA
SPECIFICATIONS
& FEATURES
Rectangular
Capacity Standard
Capacity M6 High
Column Capacity (Optional)
Blade
at 90° 18” x
22” (457 mm x 560 mm) 18” x
28” (457 mm x 711 mm)
Blade
at 45° ...