Identificador: 2891
Abierta
ID de articulo : # 2891 se ha agregado a su lista de deseos.
Descripción
PARTE: 2RI-R350V - ARMADORA DE PUERTASTechnical Data and Specifications:
Is designed for high and low volume production requirements. Is a mid-size version of our heavy duty cabinet door clamping tables. In this system the operator is freed from the task of managing individual bar or pipe clamps, and instead, uses pneumatic clamp cylinders to apply pressure to the glue line. Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square assembly. The multiple pneumatic clamps ensure high clamping pressures on the piece.
Standard Features:
- 6' X 9' Vertical Assembly Easel
- 17° Easel Angle
- (10) Universal Clamping Cylinders & Manifold
- Squaring Bars on Left and Right Sides
- (4) Material Hold Down Dogs
- (3) Adjustable Material Positioning Stops
- 2" Cylinder Position Grid Pattern
- 3" Bore Clamp Cylinder Housing
- Heavy Duty Steel Frame
- Perforated Steel Table
- 12 port Manifold with 1/4" NPT Regulator/Gage
- Adjustable pressure from 20 to 130 PSI
- Foot Treadle
Technical Data and Specifications:
- Usable Table Area: 103" x 70"
- Work Height: 16"
- Footprint: 108" L x 27" D x 85" H
- Electrical: N/A
- Air: 80-100 PSI
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
SIERRA TRONZADORA
PARTE: 4ST-TR 350 - SIERRA TRONZADORA CUT OFF SAWS WITH ASCENDING BLADECLASSIC TOOLS FOR SAWINGIs a cut off saw that was born out to meet the crosscutting needs of small and large industries.Thanks to a pneumatic saw unit drive with bimanual hand-saving control, a motor power of 3 kWand a 350 mm diameter blade it can cut up to 80 mm thick and 210 mm wide.Technical dataBlade diameter 350 mmBlade rotation speed 3000 rpmBlade motor p...
-500x500.jpg)
AMXmachinery1
CEPILLO 1 CARA - 24 PULGADAS
PARTE: 2CK-P24HVHas a cast iron table and head assembly with robust welded steel frame results in superior planing finish due to greatly reduced vibration. The spiral insert knife cutterhead runs extremely quiet and the solid carbide inserts provide a smooth finish and have a long life. When one edge gets dull simply rotate the knife 90 degrees for a new cutting edge. Knives can be rotated four times before needing to be replaced.Spiral Insert Knife Cutterhead with replaceable carbide inse...
AMXmachinery1
EXTRACTOR DE POLVOS - 15 HP
PARTE: 2EX-DB-150 - EXTRACTOR DE POLVOS - 15 HPOur dust blowers are made up of a heavy duty dynamically balanced vaneaxial fanwith safety guards on all inlets. The steel impeller is mounted directly to the shaft ofthe stand-mounted motor. Motors are available from 5 to 25 horsepower, 3 phaseelectric and have options for magnetic starters and remote control. Single phaseelectric motors are available for blowers up to 7.5 horsepower.Magnetic starter included.See comparison chart below for specif...
-500x500.png)
AMXmachinery1
SIERRA CINTA 24" - 2 EN 1
PARTE: 2CK-HB600A - SIERRA CINTA 24" - 2 EN 1 Is heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes it unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 5HP motor allowing you to make your cuts with ease. This bandsaw delivers high accuracy for maximum production along with a simple design that ...