Identificador: 2923
Abierta
ID de articulo : # 2923 se ha agregado a su lista de deseos.
Descripción
PARTE: 2EX-DC-3150S - COLECTOR DE POLVOS - 15 HP, 3 FASES, 230V
Nuevo con garantía
Amps: 37A @ 22V
Cfm: 7500
Dimensions: 112″ x 156″ x 50″
Fan rpm: 1725
Fan size: 25″
Filter-bags: 4
Filter area: 132
Horsepower: 15HP
Inlet-size: 14″
Phase: 3
Storage capacity: 48
Weight: 925 lbs
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
SIERRA RADIAL - MOTOR 4.5 HP
PARTE: 1SL-DC-SBR14-45 - SIERRA RADIAL - MOTOR 4.5 HPNueva con garantiaMotor 4.5 HP, 220V, 60Hz, 3 fasesMedidas de la mesa 34-1/2” x 43-1/4”Diámetro del disco 14”Diámetro del eje 1”Máxima capacidad de corte transversal 24-3/8”Máximo espesor de corte 4-1/8”Movimiento angular del brazo 45 - 0 - 45 gradosMovimiento angular del motor 0 – 22 – 45 – 90 gradosGiro del motor 0 – 180 gradosPeso de la maquina 200 kilosTipo de empaque 1 caja
AMXmachinery
REASERRADORA - 1 BANDA - BANDA 12” ANCHO
PARTE:
12374 - REASERRADORA - 1 BANDA - BANDA 12” ANCHO - GRIZZLY
Usadas - Buenas condiciones
Motor 20 HP, 220/440V, 3 fases
Unidad hidráulica 2 HP
Volantes 28”
Zapata de 1”
-500x500.jpg)
AMXmachinery
PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”
PARTE: 2LO-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”New with warrantyFor mass productions, 2 to 3 minute per cycle for drying or bending the wood projectVarieties of wood bending shapes are able to produce.Press one large part, slicing into many small pieces for high productivity.Meet all kinds of furniture fabrications.One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.Using woo...
AMXmachinery
SIERRA VERTICAL ELCON CON NAVAJA
PARTE: 4EL-LANCET - SIERRA VERTICAL - CON NAVAJA - ELCONHow to improve/speed up the processing of multiwall polycarbonate sheets?By using a static knife instead of a sawblade. This reduces the amount of time spent on cleaning out the channels. The static knife delivers precise and clean cuts, without chips. Thus reducing wasting time on the post-processing. Some of the companies owning a Lancet reported up to 75% time saved.The Elcon Lancet is another #custombuilt solution that very few people...