Identificador: 2970
Abierta
ID de articulo : # 2970 se ha agregado a su lista de deseos.
Descripción
PARTE: 2JG-MAG-BEST960S - SIERRA RADIAL - BEST 960S - 7.5 HP - 20” DISCO
Nueve con garantía
7.5 HP, 2800 RPM motor
20" Diameter blade capacity with a 1" arbor (not included)
77.5" x 50.5" Table size
33.4" Maximum crosscut length on 3/4" thick material (90 deg)
23.2" Maximum crosscut length at 45 deg (right side)
15.7" Maximum crosscut length at 45 deg (left side)
7.8" Maximum depth of cut
Dust chute on blade guard as well as rear of table
Machine weight: 686 Lbs.
Machine dimensions: 78" x 69" x 63" Tall
Crated dimensions: 60" x 40" x 30" H
Crated weight: 762 lbs.
NOTE THIS PRODUCT REQUIRES ASSEMBLY
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12451 - LIJADORA DE BANDA ANCHA - LOBO
PARTE: 12451 - LIJADORA DE BANDA
ANCHA - LOBO
USADA - BUENAS CONDICIONES220V, 3 FASES, 60 HZMFG: 2000Motor alimentador 1 HP,Motor principal 5 HP o 7.5 HP
AMXmachinery
PARTE: 2MA- FP-2560 – LIJADORA 1 LIJA - CALIBRADORA DE METAL – 25” ANCHO - 1 LIJA
PARTE: 2MA- FP-2560 – LIJADORA 1 LIJA -
CALIBRADORA DE METAL – 25” ANCHO - 1 LIJANUEVA CON GARANTIASpecifications:
Model
FP-2560 FP-4075 FP-5285Sanding
Capacity 24”
x 6-1/8” 40” x 6-1/8” 51” x 3-1/2”Abrasive
Belt ...
AMXmachinery
PARTE: 1SL-DC-DC2047 - COLECTOR DE ASERRIN DE 7 HP
PARTE: 1SL-DC-DC2047 - COLECTOR DE ASERRIN DE 7 HPNUEVO CON GARANTIAMOTOR: 7 HP, 220V, 60 Hz, 3 FASESCAPACIDAD DE SUCCION: 3,500 CFMNUMERO DE BOLSAS Y FILTROS: 4BOLSAS SUPERIORES: 46" ALTOBOLSAS INFERIORES: 32" ALTOMEDIDAS TOTALES: 220 CM LARGO X 100 CM ANCHO X 220 CM ALTOPESO: 100 KGSTIPO DE EMPAQUE: 1 CAJAENTRADA DE 7" DIAMETRO Y CON 1 TAPA CON 4 ENTRADAS DE 4" DIAMETRO CADA UNA
AMXmachinery
LIJADORA CALIBRADORA SUPERIOR E INFERIOR – 1300 MM (51”) - ANCHO
PARTE: 3UD-SUR1300V – LIJADORA CALIBRADORA SUPERIOR E
INFERIOR – 1300 MM (51”) - ANCHO
NUEVA CON GARANTIA
Rack sheet metal part
1) The lower body is
made of heavy-duty base, which is welded around
the whole with a whole
plate, and the bottom is welded with dense channel
steel and steel plate
connection, which enhances the stability and strength
of the lower body and
ensures that the base is not deformed;
2) The conveying bed is
welded with 18mm thick steel plate...