Identificador: 3169
Abierta
ID de articulo : # 3169 se ha agregado a su lista de deseos.
.PNG)
Descripción
PARTE: 2CK-BS600-3H - CEPILLO DE ALAMBRE - 3 CABEZAS
Produce distressed wire brush flooring and paneling with ease!
Is designed to remove the soft grain between the growth rings to produce distressed wood flooring, paneling, and more. Following the wire brush heads is a nylon brush that is designed to remove any raised fibers that appear from the wire brushing. With variable frequency inverters to control the brush RPM and feed speed you have ultimate control over your finished aesthetic.
- Powerful individual 10HP motors for each brushing head
- Independent variable frequency drives on each brushing unit for ultimate control of the final product
- Variable feed speed by frequency inverter for additional control over the final finish results
- Motorized brush thickness adjustment with electronic position readout for repeatable results
- Outboard bearing supports on brushing units
- Individual reversing switches for each brushing unit to change the brushing direction
- Individual amp meters on each spindle for load monitoring
- Automatic conveyor belt tracking to ensure belt does not track off to one side
- Spring loaded rubber hold down rollers to ensure consistent feeding of material
Machine Controls
Ergonomically located machine controls for operator convenience. Controls include: variable feed speed & RPM controls, individual motor on/off switches, emergency stop, up/down buttons, and forward reverse switch. The digital control displays the material thickness setting, brush RPM, and brush head amp draw for load monitoring.
Powerful 10HP Motors
Powerful 10HP brushing motors are controlled by individual VFD inverter controls and reversing switches to allow operator for full control over brushing operations to achieve the desired results.
1st Head: Wire Brush Head – Medium Structuring
- Diameter of wire brush head: 10” (254 mm)
- Diameter of wire: 0.35mm
- Diameter of wire brush head: 10” (254 mm)
- Diameter of wire: 0.2 mm
3rd Head: Abrasive Nylon Brush (Tynex)
- Diameter of Abrasive Nylon Brush: 10” (254 mm)
- Brush grit & diameter (standard): 80 Grit (1.25mm)
- The nylon brush is designed to remove any raised fibers that are created during the wire brush operation
Outboard Bearing
Equipped with an outboard bearing which supports the brushing spindle, greatly reducing vibration.
Rubber Hold Down Rollers
Spring loaded rubber hold down rollers before and after each brushing unit ensures material is held firmly on to the conveyor belt during brushing operations.
Conveyor Belt
The rubber conveyor belt ensures the material is fed through the brushing heads consistently. The belt speed is controlled by a variable frequency drive. The belt is equipped with an auto tracking cylinder to ensure it does not over track to one side which prevents it from being damaged.
Feed Motor
The 1HP feed motor is controlled by a variable frequency drive with feed speeds of 7 to 39 FPM.
|
Maximum working width |
23.6″ |
|
Maximum working thickness |
11.8″ |
|
Spindle motors |
10HP x 3 pcs |
|
Spindle RPM |
200 ~ 1200 RPM |
|
Feed motor |
1 HP |
|
Feed speed (variable) |
7~39 FPM |
|
Elevation motors |
0.5 HP x 3 pcs |
|
Machine dimensions |
90.5” x 57” x 82.7” |
|
Shipping dimension |
100” x 64” x 89” |
|
Machine weight |
4320 lbs |
|
Shipping weight |
5104 lbs |
|
Dust ports |
3 x 4.75” |
|
Power requirements |
230/3/60 = 86 amps or 460/3/60 = 43 amps |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery1
SIERRA DE BANCO - 14" 10 HP
PARTE: 2CK-TA1214 - SIERRA DE BANCO - 14" 10 HPIs for serious woodworkers and production shops that require an industrial strength and powerful table saw. The large precision-ground & polished cast-iron table and cast-iron saw unit ensure vibration free cutting with optimum cut quality. The quick setting T-square rip fence is equipped with dual inch & metric scales for precise rip cutting. The blade guard is mounted to a splitter with anti-kickback pawls for safe operation. Comes standard...
AMXmachinery1
REASERRADORA VERTICAL – CON ALIMENTADOR - VOLANTES 32”
PARTE:
2CK-HB-800 - REASERRADORA VERTICAL – CON ALIMENTADOR - VOLANTES 32”
NUEVA CON GARANTIAA 4” wide blade is driven by a powerful 20HP motor for precision straight resawing. Equipped with a 1HP power variable speed feed unit which is pneumatically actuated to provide consistent feeding of the workpiece. The feed speed can be variably adjusted from 3 to 56 FPM in accordance with the material type and thickness.Cast iron upper and lower saw wheels are precision machined and dynami...
-500x500.png)
AMXmachinery1
PERFORADORA DE CLAVIJAS
PERFORADORA DE CLAVIJASOne-man operated dowel drilling machines • Drilling from 4 sides : top, right, left, back• Capacity of up to 22 pcs/min• Vertical magazine• One-man operatedExtra:• Side movement• Single drop magazine• Possibility to revers items out of the machine• Can be integrated in a line of machines• Waste ConveyerLength:160 – 1500 mm160 – 2200 mmHeight:10 – 40 mmWidth:25 – 250 mm
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - 5HP
PARTE: 2MK-CPD/5.S - COLECTOR DE POLVOS - 5HPIs ideal for cabinet shops with high production. With a 200 liters (53 Gallons) tank capacity, you can attach carbon steel or bag, both tanks are easy to be replaced. It has 5 entries with 100 mm (4 inches) and a 5 hp motor. The entry system can be changed according to the needs of its owner.Technical InformationMotor specs5 HP 3 phases 220V 20 AAir Flow Capacity2760 CFMBag volume400 L (14.13 ft³)Number of air inlet:5 (4in)Filtration2.5 micronBag siz...